6 Commits

Include renames

Author	SHA1	Message	Date
Sahil BansalandGitHub	94781d6bda	Remove guard mode: proxy interception is now the only flow (#386) ... * refactor: remove guard mode execution paths and guard-only packages Guard (non-proxy) mode is removed; all package-manager commands now always run the proxy flow. Removes the guard engine, the common flow, the extractor package, the npm/pypi dependency resolvers and the PackageResolver plumbing that only guard mode consumed. The guard package retains only PackageManagerGuardInteraction, which the proxy flow and confirmation interceptors reuse for user prompts. Proxy behavior is unchanged. * refactor: remove proxy opt-out surfaces, guard references in config, action and docs Removes Config.ProxyMode, ProxyConfig.Enabled, IsProxyModeEnabled, the proxy_mode legacy fallback, PMG_PROXY_ENABLED handling and the --proxy-mode / --include-dev-dependencies flags. Proxy interception can no longer be disabled. Also removes the proxy-mode input from the GitHub Action, the proxy-mode doctor check and setup info row, updates the E2E workflow to stop passing --proxy-mode=false, and sweeps guard-mode wording from docs and the config template. The legacy proxy_install_only flat key and PMG_PROXY_INSTALL_ONLY env var remain supported. audit.FlowTypeGuard is kept so previously recorded audit events still translate for cloud sync. * feat: fail loudly when a removed proxy opt-out is still configured A leftover proxy.enabled: false / proxy_mode: false config key or PMG_PROXY_ENABLED=false / PMG_PROXY_MODE=false env var previously meant guard mode; silently ignoring it would switch those users to proxy interception without notice. PMG now exits with an actionable error naming the exact source. Precedence mirrors the old resolution order: env (ignored under lockdown) > proxy.enabled > legacy proxy_mode. The pmg config subtree is exempt so the config file can still be fixed with pmg config edit/set. The GitHub Action's proxy-mode input is kept as a tombstone that fails the action when set to false and warns otherwise. * refactor: extract flows.RunProxy and address review findings Collapses the identical parse-then-run body duplicated across the 12 package manager commands into flows.RunProxy. Documents the cache-hit / offline analysis trade-off versus the removed guard manifest path, fixes a stale non-proxy label in the E2E workflow and a stale guard reference in the uvx parser comment. * fix(config): mirror old proxy opt-out precedence exactly PMG_PROXY_MODE only ever took effect through the legacy fallback, which was gated on the presence of a proxy: key in the config file (even a null one). Promoting it to the top env tier caused two inversions: a stale PMG_PROXY_MODE=false hard-failed configs that resolved to proxy mode, and PMG_PROXY_MODE=true silently overrode an explicit proxy.enabled: false file opt-out. The check now resolves in the old order: PMG_PROXY_ENABLED > proxy: section (presence gates the legacy tier) > PMG_PROXY_MODE > flat proxy_mode. parseOptOutBool also accepts numeric values (0 = false) to match viper's WeaklyTypedInput/cast.ToBool coercion, so proxy.enabled: 0 and proxy_mode: 0 are detected as opt-outs. * refactor: move package manager interaction out of guard * refactor: trim package manager interaction * fix(config): normalize config keys viper-style in proxy opt-out check Viper resolved config file keys case-insensitively and expanded dotted keys, so spellings like Proxy:, Enabled:, a literal proxy.enabled key or Proxy_Mode selected guard mode before the removal. The opt-out check now lowercases keys recursively and nests dotted keys before matching, so those existing opt-outs fail loudly instead of being silently ignored. * refactor: remove inert transitive controls, dead parser state and guard audit variant transitive / transitive_depth lost their only consumers with the dependency resolvers; remove the config fields, flags, template and doc entries, and the report/audit plumbing that misreported transitive analysis as enabled. Remove write-only parser state (PackageInstallTarget.Extras, ParsedCommand.ManifestFiles, ShouldExtractFromManifest); IsManifestInstall stays as it feeds sandbox gating via IsInstallationCommand. Remove audit.FlowTypeGuard and its cloud mapping; guard events recorded by pre-removal versions in an unsynced WAL translate to UNSPECIFIED. * fix: address review findings on the opt-out wiring and cleanups Move the removed-opt-out rejection from the CLI PersistentPreRun into proxyFlow.Run: the check now fires exactly for package-manager runs, so non-install commands (pmg setup remove, doctor, config, version) stay usable to fix or remove an opted-out installation, and future commands inherit or avoid the check by construction instead of by exemption list. Also: make the e2e malicious-package assertion actually fail the job when an install is not blocked, route pmg go through flows.RunProxy, and drop the dead extras return from pypiParsePackageInfo (extras are still stripped from package names). * fix(config): make the removed opt-out check faithful to the old resolution The gate that silenced the legacy proxy_mode surfaces matched the raw proxy key case-sensitively in the old code, while values resolved viper-style (case-insensitive, dotted keys); applying each semantic where the old code did fixes both divergences: a case-variant Proxy: section no longer hides a flat proxy_mode: false opt-out, and a dotted proxy.enabled: false overridden by proxy_mode: true no longer errors. Replace the generic key-tree normalization with two targeted lookups (the check only ever resolves proxy.enabled and proxy_mode), which also makes colliding spellings resolve deterministically. Coerce legacy-tier values cast.ToBool-style so PMG_PROXY_MODE=off style opt-outs are detected, log the config read error instead of swallowing it, and shorten the error to a one-line statement with the specific remedy in the help text. Add lockdown coverage (env inert both directions) and a repeated-run determinism test. * fix(config): fall back to defaults for unrecognized proxy opt-out values The old loader swallowed viper errors and ran on defaults, so values like proxy.enabled: yes or PMG_PROXY_ENABLED=banana silently discarded the whole config and defaulted to proxy. Treat them the same way now: unrecognized values mean the default (proxy on) instead of a hard error, and the doc comment no longer claims the old loader failed loudly. Only values that actually meant guard mode fail. Also check the removed opt-out before the CA trust check in pmg go, restoring the old error precedence: a config problem must not steer the user into an unnecessary OS trust store change. * fix(e2e): PMG_PROXY_MODE assertion must match the legacy gate semantics The runner's setup step writes the template config, which has a proxy: section — and with one present the legacy PMG_PROXY_MODE was always inert, so expecting a loud failure there asserts pre-fidelity-fix behavior. Assert both sides instead: inert (command succeeds) with the standard config, loud failure against an empty config dir where the legacy fallback actually applied. * refactor(config): collapse parseOptOutBool to ParseBool over the string form YAML hands us typed values (bool, int), so route them through fmt.Sprintf %v and strconv.ParseBool instead of a per-type switch. Identical behavior for every recognized value; numbers other than 0/1 now read as no opinion instead of cast.ToBool's nonzero-true, which no real config relies on.	2026-07-22 15:19:19 +05:30
Sahil BansalandGitHub	46803f8e70	fix(doctor): stop npm protection passing when the real package manager is absent (#378) ... `pmg setup doctor` reported npm protection as OK on a machine with no npm installed. Two compounding defects: 1. The availability gate used a plain `exec.LookPath`, which resolves the PMG shim on PATH rather than the real binary, so the "skip" branch never fired. It now uses `shim.ResolveRealBinary` (PATH with shim dirs stripped), matching the runner, so a missing real binary correctly yields WARN "not available". 2. The result was inferred purely from a non-zero exit, so PackageManagerNotFound (exit 127) and other failures were misread as a successful block. The check now requires PMG's block headline in the captured output before reporting PASS; other non-zero exits report WARN with the error surfaced. The block headline is extracted into `ui.MalwareBlockedHeadline` so the doctor's marker stays in sync with what PMG prints across its block-output sites.	2026-07-15 09:11:52 +05:30
Sahil BansalandGitHub	2d938ea381	feat: advisory message appended to block output (#362) ... * docs(specs): add custom block messages and package blocklist spec * docs(specs): add custom block messages and package blocklist implementation plan * feat(config): add blocked_packages list and custom block messages * feat(audit): add package_blocklist_blocked event and blocklist model * feat(proxy): block blocklisted packages in the policy gate before analysis * feat(guard): block blocklisted packages before trust skip and analysis * feat(ui): render blocklist blocks and custom messages, fix silent-mode block output * feat(proxy): append custom messages to malware and go-cooldown block bodies * test(proxye2e): cover blocklist enforcement and custom block messages * docs(specs): remove spec and plan documents * refactor: drop guard-flow blocklist enforcement and trim docs Guard mode is being deprecated; the blocklist is enforced in proxy mode only. Remove the trusted_packages mirroring references outside the docs. * refactor(config): consolidate blocklist and block message under top-level block section Replace dependency_cooldown.message, malware.message and blocked_packages with a single block section: block.message is appended to every block output regardless of which control blocked, and block.packages is the package blocklist. * fix(ui): render block.message as info note with clean spacing * fix(ui): indent wrapped continuation lines in block reasons and messages * update config template * refactor(config): replace block section with top-level advisory_message Remove the package blocklist (will be implemented as part of policies in the future) and replace block.message with an optional top-level advisory_message appended to every block output. * chore(config): move advisory_message near top-level scalar configs in template	2026-07-09 17:49:00 +05:30
3 people	987bda5d6a	feat: Add dependency cooldown for npm packages (#200) ... * feat: Add dependency cooldown for npm packages Strip recently-published package versions from npm registry metadata responses so npm's resolver naturally falls back to older versions. Overrides the Accept header to force full packument responses (which include the "time" field needed for publish-date checks). Reports cooldown blocks only when all versions are stripped (remaining == 0), matching npm's --min-release-age behavior for silent fallback. * fix: Report oldest version in cooldown block (shortest wait) When all versions are blocked by cooldown, report the oldest version since it exits the cooldown window first — giving the user the shortest wait time instead of the longest. * fix: Handle resp.Body.Close error return for errcheck linter * test: Add dependency cooldown assertions to template config tests * fix: config template for dependency cooldown * fix: Prevent npm from caching cooldown-stripped metadata responses * fix: Restore body on ReadAll failure and log Close errors in response modifier * fix: Close response body before replacing to prevent connection leak * fix: Correct daysLeft ceiling math and update ContentLength on error recovery * fix: Clear Status on status code change and update ContentLength in modifier error path * refactor: address review comments on dependency cooldown PR - Make NpmCooldownHandler and constructor package-private - Pass cooldown days as parameter instead of reading config internally - Convert standalone functions to methods on npmCooldownHandler - Set Accept-Encoding: identity to prevent gzip responses breaking JSON parsing - Return 503 with descriptive message when upstream body read fails * fix: log errors in stripCooldownVersions instead of swallowing them * fix: Config preserve fallback defaults * fix: Code review fixes * fix: correct cooldown tip to show wait time instead of incorrect trusted_packages advice * fix: prevent integer overflow in cooldown duration calculation with large days values * refactor: deduplicate CooldownBlock into internal/models, fix misleading variable names - Move CooldownBlock struct to internal/models to eliminate duplication between proxy/interceptors and internal/ui packages - Simplify proxy_flow.go by using direct assignment instead of field copy - Rename latestStripped/latestDate to oldestVer/oldestDate for clarity * fix: Dependency Cooldown Check Encapsulation (#207) * fix: Encapsulate cooldown check * feat: Add --skip-dependency-cooldown override * fix: Code review fixes --------- Co-authored-by: Abhisek Datta <abhisek.datta@gmail.com>	2026-04-08 21:04:17 +05:30
Sahil BansalandGitHub	7fe9fc8763	provide package blocked feedback in proxy mode (#154) ... * provide package blocked feedback in proxy mode * update test case & clear status on block * refactor reporting * clearStatus on `continueExecution` * set spinnerChan to nil * add sync for spinner	2026-02-11 09:22:18 +05:30
Abhisek DattaandGitHub	36ac3e3384	feat: Add post-exec reporting support (#134) ... * feat: Add post install reporting support * fix: UI report handling * fix: Duplicate reporting * fix: Show warning on insecure bypass * fix: Proxy event log insecure skip installation * fix: Proxy event log insecure skip installation * fix: Common definition for infer outcome	2026-01-27 17:50:26 +05:30