* refactor: remove guard mode execution paths and guard-only packages
Guard (non-proxy) mode is removed; all package-manager commands now
always run the proxy flow. Removes the guard engine, the common flow,
the extractor package, the npm/pypi dependency resolvers and the
PackageResolver plumbing that only guard mode consumed.
The guard package retains only PackageManagerGuardInteraction, which
the proxy flow and confirmation interceptors reuse for user prompts.
Proxy behavior is unchanged.
* refactor: remove proxy opt-out surfaces, guard references in config, action and docs
Removes Config.ProxyMode, ProxyConfig.Enabled, IsProxyModeEnabled, the
proxy_mode legacy fallback, PMG_PROXY_ENABLED handling and the
--proxy-mode / --include-dev-dependencies flags. Proxy interception can
no longer be disabled.
Also removes the proxy-mode input from the GitHub Action, the
proxy-mode doctor check and setup info row, updates the E2E workflow to
stop passing --proxy-mode=false, and sweeps guard-mode wording from
docs and the config template.
The legacy proxy_install_only flat key and PMG_PROXY_INSTALL_ONLY env
var remain supported. audit.FlowTypeGuard is kept so previously
recorded audit events still translate for cloud sync.
* feat: fail loudly when a removed proxy opt-out is still configured
A leftover proxy.enabled: false / proxy_mode: false config key or
PMG_PROXY_ENABLED=false / PMG_PROXY_MODE=false env var previously meant
guard mode; silently ignoring it would switch those users to proxy
interception without notice. PMG now exits with an actionable error
naming the exact source. Precedence mirrors the old resolution order:
env (ignored under lockdown) > proxy.enabled > legacy proxy_mode.
The pmg config subtree is exempt so the config file can still be fixed
with pmg config edit/set. The GitHub Action's proxy-mode input is kept
as a tombstone that fails the action when set to false and warns
otherwise.
* refactor: extract flows.RunProxy and address review findings
Collapses the identical parse-then-run body duplicated across the 12
package manager commands into flows.RunProxy. Documents the cache-hit /
offline analysis trade-off versus the removed guard manifest path,
fixes a stale non-proxy label in the E2E workflow and a stale guard
reference in the uvx parser comment.
* fix(config): mirror old proxy opt-out precedence exactly
PMG_PROXY_MODE only ever took effect through the legacy fallback, which
was gated on the presence of a proxy: key in the config file (even a
null one). Promoting it to the top env tier caused two inversions: a
stale PMG_PROXY_MODE=false hard-failed configs that resolved to proxy
mode, and PMG_PROXY_MODE=true silently overrode an explicit
proxy.enabled: false file opt-out. The check now resolves in the old
order: PMG_PROXY_ENABLED > proxy: section (presence gates the legacy
tier) > PMG_PROXY_MODE > flat proxy_mode.
parseOptOutBool also accepts numeric values (0 = false) to match
viper's WeaklyTypedInput/cast.ToBool coercion, so proxy.enabled: 0 and
proxy_mode: 0 are detected as opt-outs.
* refactor: move package manager interaction out of guard
* refactor: trim package manager interaction
* fix(config): normalize config keys viper-style in proxy opt-out check
Viper resolved config file keys case-insensitively and expanded dotted
keys, so spellings like Proxy:, Enabled:, a literal proxy.enabled key or
Proxy_Mode selected guard mode before the removal. The opt-out check now
lowercases keys recursively and nests dotted keys before matching, so
those existing opt-outs fail loudly instead of being silently ignored.
* refactor: remove inert transitive controls, dead parser state and guard audit variant
transitive / transitive_depth lost their only consumers with the
dependency resolvers; remove the config fields, flags, template and doc
entries, and the report/audit plumbing that misreported transitive
analysis as enabled.
Remove write-only parser state (PackageInstallTarget.Extras,
ParsedCommand.ManifestFiles, ShouldExtractFromManifest); IsManifestInstall
stays as it feeds sandbox gating via IsInstallationCommand.
Remove audit.FlowTypeGuard and its cloud mapping; guard events recorded
by pre-removal versions in an unsynced WAL translate to UNSPECIFIED.
* fix: address review findings on the opt-out wiring and cleanups
Move the removed-opt-out rejection from the CLI PersistentPreRun into
proxyFlow.Run: the check now fires exactly for package-manager runs, so
non-install commands (pmg setup remove, doctor, config, version) stay
usable to fix or remove an opted-out installation, and future commands
inherit or avoid the check by construction instead of by exemption list.
Also: make the e2e malicious-package assertion actually fail the job
when an install is not blocked, route pmg go through flows.RunProxy,
and drop the dead extras return from pypiParsePackageInfo (extras are
still stripped from package names).
* fix(config): make the removed opt-out check faithful to the old resolution
The gate that silenced the legacy proxy_mode surfaces matched the raw
proxy key case-sensitively in the old code, while values resolved
viper-style (case-insensitive, dotted keys); applying each semantic
where the old code did fixes both divergences: a case-variant Proxy:
section no longer hides a flat proxy_mode: false opt-out, and a dotted
proxy.enabled: false overridden by proxy_mode: true no longer errors.
Replace the generic key-tree normalization with two targeted lookups
(the check only ever resolves proxy.enabled and proxy_mode), which also
makes colliding spellings resolve deterministically. Coerce legacy-tier
values cast.ToBool-style so PMG_PROXY_MODE=off style opt-outs are
detected, log the config read error instead of swallowing it, and
shorten the error to a one-line statement with the specific remedy in
the help text.
Add lockdown coverage (env inert both directions) and a repeated-run
determinism test.
* fix(config): fall back to defaults for unrecognized proxy opt-out values
The old loader swallowed viper errors and ran on defaults, so values
like proxy.enabled: yes or PMG_PROXY_ENABLED=banana silently discarded
the whole config and defaulted to proxy. Treat them the same way now:
unrecognized values mean the default (proxy on) instead of a hard
error, and the doc comment no longer claims the old loader failed
loudly. Only values that actually meant guard mode fail.
Also check the removed opt-out before the CA trust check in pmg go,
restoring the old error precedence: a config problem must not steer
the user into an unnecessary OS trust store change.
* fix(e2e): PMG_PROXY_MODE assertion must match the legacy gate semantics
The runner's setup step writes the template config, which has a proxy:
section — and with one present the legacy PMG_PROXY_MODE was always
inert, so expecting a loud failure there asserts pre-fidelity-fix
behavior. Assert both sides instead: inert (command succeeds) with the
standard config, loud failure against an empty config dir where the
legacy fallback actually applied.
* refactor(config): collapse parseOptOutBool to ParseBool over the string form
YAML hands us typed values (bool, int), so route them through
fmt.Sprintf %v and strconv.ParseBool instead of a per-type switch.
Identical behavior for every recognized value; numbers other than 0/1
now read as no opinion instead of cast.ToBool's nonzero-true, which no
real config relies on.
* docs(specs): add custom block messages and package blocklist spec
* docs(specs): add custom block messages and package blocklist implementation plan
* feat(config): add blocked_packages list and custom block messages
* feat(audit): add package_blocklist_blocked event and blocklist model
* feat(proxy): block blocklisted packages in the policy gate before analysis
* feat(guard): block blocklisted packages before trust skip and analysis
* feat(ui): render blocklist blocks and custom messages, fix silent-mode block output
* feat(proxy): append custom messages to malware and go-cooldown block bodies
* test(proxye2e): cover blocklist enforcement and custom block messages
* docs(specs): remove spec and plan documents
* refactor: drop guard-flow blocklist enforcement and trim docs
Guard mode is being deprecated; the blocklist is enforced in proxy mode
only. Remove the trusted_packages mirroring references outside the docs.
* refactor(config): consolidate blocklist and block message under top-level block section
Replace dependency_cooldown.message, malware.message and blocked_packages
with a single block section: block.message is appended to every block
output regardless of which control blocked, and block.packages is the
package blocklist.
* fix(ui): render block.message as info note with clean spacing
* fix(ui): indent wrapped continuation lines in block reasons and messages
* update config template
* refactor(config): replace block section with top-level advisory_message
Remove the package blocklist (will be implemented as part of policies in
the future) and replace block.message with an optional top-level
advisory_message appended to every block output.
* chore(config): move advisory_message near top-level scalar configs in template
* feat: Add dependency cooldown for npm packages
Strip recently-published package versions from npm registry metadata
responses so npm's resolver naturally falls back to older versions.
Overrides the Accept header to force full packument responses (which
include the "time" field needed for publish-date checks).
Reports cooldown blocks only when all versions are stripped (remaining == 0),
matching npm's --min-release-age behavior for silent fallback.
* fix: Report oldest version in cooldown block (shortest wait)
When all versions are blocked by cooldown, report the oldest version
since it exits the cooldown window first — giving the user the
shortest wait time instead of the longest.
* fix: Handle resp.Body.Close error return for errcheck linter
* test: Add dependency cooldown assertions to template config tests
* fix: config template for dependency cooldown
* fix: Prevent npm from caching cooldown-stripped metadata responses
* fix: Restore body on ReadAll failure and log Close errors in response modifier
* fix: Close response body before replacing to prevent connection leak
* fix: Correct daysLeft ceiling math and update ContentLength on error recovery
* fix: Clear Status on status code change and update ContentLength in modifier error path
* refactor: address review comments on dependency cooldown PR
- Make NpmCooldownHandler and constructor package-private
- Pass cooldown days as parameter instead of reading config internally
- Convert standalone functions to methods on npmCooldownHandler
- Set Accept-Encoding: identity to prevent gzip responses breaking JSON parsing
- Return 503 with descriptive message when upstream body read fails
* fix: log errors in stripCooldownVersions instead of swallowing them
* fix: Config preserve fallback defaults
* fix: Code review fixes
* fix: correct cooldown tip to show wait time instead of incorrect trusted_packages advice
* fix: prevent integer overflow in cooldown duration calculation with large days values
* refactor: deduplicate CooldownBlock into internal/models, fix misleading variable names
- Move CooldownBlock struct to internal/models to eliminate duplication
between proxy/interceptors and internal/ui packages
- Simplify proxy_flow.go by using direct assignment instead of field copy
- Rename latestStripped/latestDate to oldestVer/oldestDate for clarity
* fix: Dependency Cooldown Check Encapsulation (#207)
* fix: Encapsulate cooldown check
* feat: Add --skip-dependency-cooldown override
* fix: Code review fixes
---------
Co-authored-by: Abhisek Datta <abhisek.datta@gmail.com>
