Apply clippy auto-fixes (filter().next() → find(), bool assert_eq →
assert!, len() >= 1 → !is_empty(), map_or(false, …) → is_some_and, etc.)
and refactor validate_device to take an expected Device instead of 8
positional args. Production code was already clean; all 60 tests pass.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The aliases re-encoded the module path into a name that no longer
matched the source identifier (e.g. `use super::finder as mdns`). Use
the actual module names at call sites; in the two web_server handlers
the local `status` fn collides with the module, so the single call site
uses the fully-qualified path instead.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Group each discovery protocol's primitive (finder), orchestration loop
(scanner), and status state under one module tree instead of splitting
them between device_finders/ and crate-root *_scanner / *_scanner_status
files. Also includes incidental rustfmt fixes to a few pre-existing
long lines.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Scanners now call seen() (sighting semantics: stamp last_seen, preserve
registration, conditional vendor/device_type/name writes). update() is
the user-editable mutation (owner, device_type, vendor) wired to
PUT /api/devices/{mac_address}.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Subscribes the devices list and notifications list to a shared
RouteObserver so they refetch when a pushed route (e.g. device detail)
is popped, avoiding stale state after registering or updating a device.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Why: a device manually registered as "Laptop" was being overwritten to
"Phone" when a later scan deduced a vendor that maps to a different type.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Display registered devices with a "John's Laptop" title and move their
IP address into the card body, instead of showing the owner separately.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Treat an empty->non-empty vendor transition as not a change, so first
deducing a vendor for a device that previously had none no longer raises
a "vendor changed" notification.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Add dedicated db::devices::register/unregister methods so registration
state (is_registered, owner) is owned by the API endpoints, and make
update sighting-only. This stops scanner re-sightings from wiping a
device's registration. Also preserve an existing mDNS hostname instead
of overwriting it on re-sighting.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Modern devices increasingly use randomized ("Private WiFi Address") MACs,
which are locally administered and have no real OUI, so the MAC-prefix
vendor lookup returns nothing. Such devices still advertise distinctive
mDNS service types, which we now use to deduce their vendor.
- Extend the mDNS parser to also capture PTR service types alongside
A-record hostnames.
- Add a service-type -> vendor mapping (data/mdns-service-vendor.json) and
a service_vendor_finder, using canonical vendor names so device-type
resolution still chains.
- Add utils::network::is_locally_administered to detect randomized MACs.
- In the mDNS scanner, fall back to service-based deduction only when the
OUI lookup is empty and the MAC is locally administered.
- Group the three finders under a new data module.
- Preserve a known vendor (and its derived device_type) when a later
sighting cannot deduce one, and suppress the spurious "vendor changed"
notification in that case.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Use SelectableText for the IP address and all info-card values so users
can select and copy them (e.g. the MAC address).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Mirror the notifications list paging pattern (offset/limit, fetch one
extra row to detect the next page, First/Prev/Next controls) across the
devices DB query, REST endpoint, API client and UI. Also add a First
page button to the notifications pagination row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Add an mDNS Scanner status card to the Status screen mirroring the ARP
card, and replace the ARP card on the Home screen with a combined Status
card that summarizes both scanners in one line each. Extract the shared
duration formatting helper into utils/duration_formatter.dart.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move select_interface and MAC-resolution logic (resolve_mac_address,
parse_proc_net_arp, probe_mac) out of the device_finders modules into a
single utils::network utility so future scanners can reuse them. Rename
resolve to resolve_mac_address and make parse_proc_net_arp private.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Introduce a second discovery module that passively listens for mDNS
multicast announcements (224.0.0.251:5353) and feeds discovered devices
into the existing devices/events/notifications pipeline, running in its
own task alongside the ARP scanner.
Since mDNS carries an IP and hostname but no MAC (the device key), the
module resolves IP->MAC via the OS ARP cache with a targeted ARP-probe
fallback. The advertised hostname is stored in a new optional `name`
column on devices (blank for ARP-only devices); the single `update`
writes `name` only when set so ARP rescans never clobber it. Device
names are included in event/notification messages.
Adds a GET /api/mdns_scanner/status endpoint (is_listening, devices_seen,
last_device_seen_seconds_ago) wired into OpenAPI, an optional
[mdns_scanner] config section, and the corresponding Nix module option.
Also aligns the Nix module's stale `timings` section with the current
`arp_scanner` schema.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Register and Forget Device actions are now always-visible buttons
(FilledButton and error-styled OutlinedButton) placed inline below
the device info card, following M3 guidelines for in-content actions.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
HomeScreen is now a StatelessWidget responsible only for the responsive
layout structure. All notification state, pagination, filtering, and
mark-as-read logic lives in the new NotificationsList widget.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Swap PagingController/PagedSliverList for explicit page state and
Previous/Next icon buttons below the list
- Fetch pageSize+1 items to detect the last page without a total-count
API; pagination controls are hidden when there is only one page
- Remove unused infinite_scroll_pagination dependency
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
If no interface is set in the config, the ARP scanner now picks the
first non-loopback, up, IPv4-enabled interface automatically. The
setting is optional in the TOML config, sample config, and Nix module.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace Center-in-Expanded / SliverFillRemaining empty states in the
notifications and devices lists with compact, centered inline text so
status widgets below remain visible without scrolling. Also align
notification filter chips to match the devices list spacing.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Replace single NavigationRail with adaptive navigation: NavigationBar
(bottom) for compact <600dp, icon-only NavigationRail for medium
600–840dp, and extended NavigationRail for expanded ≥840dp
- Remove nested Scaffold/AppBar from About, Settings, DeviceList, and
DeviceDetail — all screens now render as plain widgets inside the
single shell Scaffold; page titles surface as inline headings
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- DeviceSummaryCard and ArpScannerCard are now tappable, navigating to
the devices list and status screen respectively
- Elevated "Devices" title to titleLarge; section subtitles promoted to
bodyMedium/w600 while row content is demoted to bodySmall
- Renamed top-level row label to "Registered in the system"
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Convert ArpScannerCard to a self-managing StatefulWidget (owns its own 5s refresh + 1s tick timers), removing the duplicated state management that existed in both HomeScreen and StatusScreen
- Extract NotificationCard to home/notification_card.dart
- Extract DeviceSummaryCard (with its 1-min refresh timer) to widgets/device_summary_card.dart
- HomeScreen drops from 515 to 253 lines; StatusScreen from 82 to 19 lines
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds a responsive Home screen combining the notification list with a
device summary panel and ARP scanner status, visible side-by-side on
wide screens and stacked on narrow ones.
Backend:
- New GET /api/devices/summary endpoint returning registered device
counts and "seen in last 24h / 7 days" breakdowns by registration
status
- Migration 07 adds indexes on (is_registered) and (last_seen,
is_registered) so summary queries use index range scans instead of
full table scans
Frontend:
- HomeScreen replaces NotificationList, embedding notifications,
device summary card, and ArpScannerCard in a LayoutBuilder-driven
two-column (≥700 px) or single-column layout
- ArpScannerCard extracted to a shared public widget reused by both
HomeScreen and StatusScreen
- Nav rail entry renamed to "Home" with home icon
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Shows ARP scanner state (running/waiting/error) with a colored indicator
and time that ticks locally every second, refreshing from the API every 5s.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Renames scanner.rs to arp_scanner.rs to future-proof for additional scanner
types. Renames the [timings] config section to [arp_scanner] and simplifies
field names (arp_sender_timeout -> sender_timeout, arp_scan_duration ->
scan_duration). Introduces arp_scanner_status module to track whether the
scan is actively running or sleeping, and exposes this via a new
GET /api/arp_scanner/status endpoint returning is_running,
running_for_seconds, and next_run_in_seconds.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Implements the /about route with app description, version info,
clickable links to the source repo and AGPL-3.0 license, and
third-party copyright notices. Adds url_launcher for cross-platform
link handling.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Lists the four Apache-2.0-only backend dependencies (openssl,
rusqlite_migration, sync_wrapper, zopfli) with their copyright holders,
as required by the Apache License 2.0 for distributed works.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replaces the old frontend-only `router` type and adds the full set used
by the backend: network_appliance, home_security, home_appliance, watch,
pc, gaming_console. Adds an `apiName` getter to map camelCase enum values
to the snake_case strings the API expects. Updates the unknown device icon
to a question mark.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Loads vendor-device-type.json at compile time (same pattern as mac-vendors-export.json)
and sets device_type when a new device is detected by the ARP scanner.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds --llm flag to update_mac_vendors to classify unmatched vendors via
Claude Haiku 4.5, and --skip-download to reuse existing vendor DB.
Adds the anthropic Python package to the Nix dev shell. Updates CLAUDE.md
with the new script command.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Introduces backend/data/update_mac_vendors, an executable Python 3 script
that downloads the latest MAC vendor database from maclookup.app and
generates vendor-device-type.json — a mapping of vendor names to device
types (phone, laptop, tablet, server, tv, printer, network_appliance,
home_security, home_appliance, watch, pc, gaming_console) used for
auto-assigning device type on first detection.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Extract inline widget closures into named StatelessWidgets (_DeviceCard,
_DeviceFilterSheet, _NotificationCard), replace magic ints and hardcoded
repeated widgets with enum-driven loops, fix the InputDecorator/DropdownButton
hack in device_actions, merge symmetric _markAsRead/_markAsNew into _setRead,
and remove dead _isLoading/_isSaving state in settings where operations are
synchronous.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The device event history chart previously fetched all events and filtered
client-side. This wires the existing created_from API parameter to the
frontend so filtering happens in the backend.
Also fixes a bug where the Today filter returned no results: rusqlite was
storing datetimes with a space separator ("YYYY-MM-DD HH:MM:SS+00:00")
while SQL filters used RFC 3339 with a T separator, causing string
comparisons to fail for same-day events. All datetime storage across
device_events, devices, and notifications is now consistently RFC 3339.
A migration converts existing records.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
rzuasti