joulenap/CHANGELOG.md

Changelog

All notable changes to Joulenap are documented here.

The format is based on Keep a Changelog, and this project adheres to Semantic Versioning.

Unreleased

0.6.0

Added

• Run history in the interface — the activity card now has two tabs. Alongside the familiar activity log there is a Run history table listing every run with its job type, what triggered it, the result, how long it took and how many guests it covered. Clicking a run expands it in place to show each step (wake, wait, backup, garbage collection, verify, power-off) with its own duration and outcome, plus that run's log lines. Failures show their error without expanding. The history is kept for as long as maintenance.history.retention_days, which the panel states.
• Stop a running job — the Run backup and Run GC buttons turn into a Stop button while a job is in progress, with a confirmation dialog that can also power the PBS off once the job has stopped. Stopping also cancels the underlying task on the Proxmox side, so a cancelled backup does not keep running on the server after Joulenap has stopped watching it. A scheduled verify can be stopped the same way. Previously a stuck backup or an unreachable PBS blocked every later job — and manual power-off — until the container was restarted.
• Prometheus metrics for Grafana — a new /metrics endpoint, protected by the same read-only API key as the dashboard integration, exposing PBS power state, scheduler state, the last run's result and duration, datastore usage, run counts, and the last backup time of every individual guest. Scraping never wakes the PBS, and cached values keep reporting while it sleeps. This makes it possible to alert on a guest quietly dropping out of your backup set; docs/INTEGRATIONS.md has the scrape configuration, the full metric list, example queries and ready-made alert rules.

Changed

• Notifications name the job that ran. A scheduled verification or a garbage-collection run that failed used to notify "backup failed"; each job type now reports its own outcome, in English and Italian.
• Removed the backup.guests.auto_include_new setting. It never had any effect, while its name and default implied newly created guests were picked up automatically. Existing configuration files keep working — the key is ignored and dropped on the next save. The behaviour it seemed to promise is what "all" and "exclude" mode already do; "include" mode is, and always was, an explicit list. The documentation now says so.
• Documentation accuracy pass. Corrected the guest-selection and garbage-collection descriptions, the Proxmox VE token privilege list (which omitted Datastore.Audit and Datastore.Allocate, so a manually created token would fail at prune time), the Proxmox Backup Server token privileges, the supported-versions table, and the API reference, which was missing several endpoints. Added a walkthrough of the Settings tabs to the install guide.

Fixed

• Toggle switches are now announced correctly by screen readers, and can no longer submit a surrounding form by accident.
• Repaired three changelog comparison links that pointed at version tags which were never published.

0.5.0

Added

• Update check (opt-in, off by default) — Joulenap can ask GitHub once a day whether a newer release exists and show a badge in the footer linking to the release notes. It is disabled unless you turn it on in Settings -> Integrations: with it off the app makes no outbound internet request at all. The check never runs as part of the container healthcheck.
• Advanced settings tab — the settings that previously existed only in config.yaml now have a home in the interface: backup mode (snapshot / suspend / stop), bandwidth limit, the keep-last and keep-yearly retention buckets, how long run history is kept, and the server's port, session lifetime and HTTPS-only cookie flag.
• Edit config.yaml from the browser — the same tab embeds a YAML editor with syntax highlighting for the whole configuration, so anything the forms don't cover is still reachable without shelling into the container. Secrets are shown as ***REDACTED*** and are never sent to the browser; leaving them untouched keeps the stored value. The document is validated before anything is written, a key you delete keeps its current value, and a Copy button gives you a secret-free copy of your configuration to attach to a bug report.

0.4.4

Changed

• Accessible confirmation dialog — the dialog shown before every backup, GC, power-off, and reset is now fully keyboard- and screen-reader-accessible: it identifies itself as a dialog, keeps focus inside while open, closes on Escape, and returns focus to the button that opened it.
• Self-hosted fonts — the interface fonts (IBM Plex) are now bundled with the app instead of being fetched from Google Fonts, so the UI makes no third-party request on load and renders correctly fully offline or air-gapped.
• Sign-in screens — the login and first-account screens are now proper forms with correct autocomplete hints, so password managers fill and save credentials reliably; the button shows progress while signing in.

Fixed

• Header status label — the header now reads "GC running" or "Verify running" during those jobs, instead of always saying "Backup running".
• Selective backup with no guests — choosing Selective mode with no guests selected is now blocked with an explanation, instead of silently saving a schedule that wakes the PBS and backs up nothing.
• Setup wizard error visibility — an error on a lower wizard step now scrolls into view (and is announced to screen readers) instead of appearing off-screen, and "Detect MAC" now tells you when auto-detection found nothing instead of doing nothing.
• Empty guest list — the guest panel now shows a "No guests found" message when a node has no guests, instead of a blank area.

0.4.3

Added

• Unsaved-changes guard — editing a settings tab (Localization, Notifications, Backup safety) or the scheduler and then navigating away now asks before discarding the edits, instead of losing them silently. Also warns on a browser tab close or refresh while there are unsaved changes.
• Request timeout — the UI now shows a clear "timed out" message instead of hanging indefinitely if the backend stops responding.

Fixed

• Setup wizard validation — a step no longer completes, and Save no longer unlocks, when a check fails: an unreachable PBS, a missing PBS API token, or an empty Wake-on-LAN MAC now block completion instead of saving a broken configuration.
• Setup wizard re-save — no longer reverts a hand-configured Proxmox VE port or TLS setting.
• Manual actions — Run backup, Run GC, and Power on/off now show the error when they fail to start, instead of appearing to do nothing.
• Scheduler toggle — the Enabled switch now explains why it reverted when the change fails, instead of silently flipping back.
• Live task log — no longer occasionally shows duplicated lines.
• Guest list — keeps the last-known guests (with an error note) when a refresh fails, rather than blanking to an empty panel. What gets backed up is unaffected: the guest set is resolved live at backup time.
• Localization tab — no longer shows a "Saved" note before anything was saved, and its fields resync if the configuration changes underneath.
• Integrations copy — corrected contradictory text about regenerating the API key. Regenerating replaces the key and the old one stops working immediately.

0.4.2

Added

• Missed-backup alert — if a scheduled backup was due while Joulenap was down (for example the container was stopped over the backup window), it is detected at the next startup and a notification is sent. The backup itself is not run automatically — use "Run backup" if you want it immediately.
• Interrupted-run alert — a run left unfinished by a restart is reported at startup, warning you when the PBS was left powered on so you can check on it.
• Setup prompt on the dashboard — when Proxmox VE and PBS aren't configured yet (a fresh install), the dashboard shows a banner that links straight to the setup wizard.

Changed

• Backup notifications now warn when the PBS was left powered on for failed and aborted runs, not only for successful ones — so an energy-costing "still awake" box is never silent.
• The Scheduler "Apply changes" action now shows saving / saved / error feedback and can't be double-submitted, matching the settings tabs; a failed save surfaces the reason instead of doing nothing.

Fixed

• Session expiry no longer leaves the UI showing stale data. When the session expires (or the backend restarts), the app returns to the login screen with a notice instead of rendering a frozen last-known status indefinitely; a "can't reach Joulenap" banner appears while the backend is unreachable and clears on recovery.
• An invalid Wake-on-LAN MAC address is now rejected when you save the configuration (with a clear error) instead of being accepted and only failing later at backup time.

0.4.1

Fixed

• SQLite concurrency — the database is opened in WAL mode with a busy timeout, so a running backup cycle's frequent commits no longer risk "database is locked" errors against the dashboard's polling; foreign-key enforcement is also enabled.
• Manual power-off race — powering the PBS off manually now holds the single-run lock across the operation, so a scheduled cycle can't start in the gap and get its PBS shut down mid-backup.
• Job-lock leak — if a worker thread fails to start (e.g. resource exhaustion), the run is marked failed and the single-run lock is released, instead of being held forever and blocking every later run until restart.
• History-prune timezone — a timezone change applied at runtime now moves the daily prune job into the new zone, instead of leaving it in the boot-time zone until restart.

Security

• config.yaml written owner-only (0600) — the config file holds API tokens, the session key, and notification secrets, so it is now created with owner-only permissions (matching the SSH key) instead of the default world-readable mode.

0.4.0

Added

• "Keep PBS on" after a manual job — the Run backup / Run GC confirmation now offers a toggle to leave the PBS powered on after the job instead of powering it back off. It defaults to the PBS's current state: a box that is already awake (for example, woken for a restore) stays on, while one that was asleep goes back to sleep afterwards. POST /api/backup/run and POST /api/gc/run accept an optional {"keep_on": true} body. Scheduled runs always power off, unchanged.
• Manual GC now wakes the PBS — "Run GC" runs as a full wake to GC to power-off cycle, so it works against a normally-off PBS instead of failing when the box is asleep.

Changed

• Manual Run backup / Run GC are now available while the PBS is asleep — they wake it themselves, so they only require that no other run is already in progress.
• Changing the admin account now requires confirming the current password (PUT /api/account), so a stolen session alone can no longer rotate the credentials.

Fixed

• Setup wizard no longer wipes the PVE token secret on re-save. Re-saving a completed wizard sent an empty secret, which the backend read as "clear it" — silently breaking every subsequent backup. The wizard now preserves the stored secret unless a new one is entered.
• exclude guest mode is no longer inverted. The dashboard showed an exclude list as a selective (include) set and, on Apply, rewrote it as include — flipping the backup set to exactly the guests meant to be skipped. Exclude mode is now shown read-only (edit config.yaml to change it) and preserved on save.
• An invalid backup cron no longer bricks startup. An unparseable backup.schedule is now rejected on save (422) and, if already present on disk, is skipped with a warning instead of crashing the scheduler on every restart.

0.3.1

Changed

• Responsive layout — the dashboard, header, and settings screen now adapt to narrow screens under a single 900px breakpoint. The settings sidebar collapses into a 2-column grid of buttons on a phone. Desktop rendering is unchanged.

Added

• A dev-only API stub (frontend/src/devStub.ts, npm run dev -- --mode stub) so contributors can work on the UI — including the full setup wizard — against fixture data, without a backend or a real Proxmox. See CONTRIBUTING.md.

0.3.0

Added

• Per-channel notification report — the "Send test" button now shows one row per channel with its own result, instead of a single "Test failed" that could not say which channel broke or why. A failing ntfy no longer makes a working Telegram look broken, and the reason reported by the delivery engine (unreachable host, 401 Unauthorized, and so on) is shown next to the channel that produced it. Secrets are stripped from the reason before it leaves the backend.
• Failed notifications during a scheduled backup are now logged with the channel name and the reason. Previously a channel that quietly stopped working left no trace anywhere.

Changed

• POST /api/notify/test always answers 200 and returns the per-channel report as {"channels": [{"channel", "ok", "error"}, ...]}. It no longer returns 400 when no channel is configured (the report is simply empty) nor 502 when delivery fails — a delivery failure is a result, not a transport error. Anything scripting this endpoint and treating a 502 as "the test failed" must now read ok per channel instead.
• Frontend dependencies moved to React 19, Vite 8, i18next 26 and TypeScript 6.

Fixed

• A notification sent by the scheduler and a manual test running at the same time could attribute one channel's failure reason to another. Each send now captures only its own thread's records.
• An exception raised while parsing a channel's Apprise URL could reach the container logs with the URL, and therefore its credentials, unredacted.
• The Docker image builds the web UI on Node 24, matching CI.
• On a transport error the test button no longer reports "couldn't save changes" for an action that saved nothing.

0.2.0

Added

• Dashboard integration — a read-only, API-key-protected GET /api/dashboard endpoint plus a Settings → Integrations panel (generate/rotate/disable the key and copy a ready-made config snippet) so Joulenap's status — PBS power state, next/last run, datastore usage — shows on homelab dashboards like Homepage, Homarr, Dashy, and Glance. See docs/INTEGRATIONS.md.
• Persistent datastore usage — disk used/total is cached whenever the PBS is awake and shown in the web UI and the dashboard endpoint even while the PBS is powered off.

Fixed

• Copy buttons now work over plain HTTP (a non-secure browser context) via a clipboard fallback, so the API key and config snippets copy correctly when Joulenap is reached at a LAN http:// address.

0.1.0 — first public release

The first release of Joulenap: schedule energy-saving Proxmox backups to a normally-off Proxmox Backup Server, all from a web UI.

Added

• Backup cycle — an in-process scheduler runs the full wake → wait → backup → maintenance → power-off cycle; nothing on the Proxmox host is modified.
• Wake-on-LAN of the PBS with a readiness wait and configurable timeout/retries.
• vzdump backups via the PVE API, with per-guest selection (all / include / exclude, plus auto-include-new) and snapshot/suspend/stop modes.
• Retention (keep last/daily/weekly/monthly/yearly) and Garbage Collection after backups.
• Verify — optional quick verify after each backup and a scheduled full-verify cycle.
• SSH power-off of the PBS (the one action with no API), with a guard that waits for running PBS tasks to finish first.
• Notifications via Apprise — Telegram, ntfy, email/SMTP, Discord, and custom Apprise/webhook URLs — on success and/or failure, localized server-side.
• Setup wizard — connect to PVE, derive PBS from the storage config, detect the PBS MAC, and optionally auto-provision scoped tokens and the poweroff SSH key. Defaults to no-root token mode; root credentials, if given, are used transiently and never stored.
• Live task-log panel streaming the real PVE/PBS task output (backup/GC/verify) as it runs.
• Per-guest last-backup caching so the dashboard shows dates while the PBS sleeps.
• Web UI — dashboard, settings, and login/auth; i18n (English + Italian) and a dark/light theme; a footer showing the app version.
• Configurable timezone (app.timezone / TZ) so schedules run in your local time, not UTC.
• Run history + activity log in SQLite with daily auto-pruning; interrupted runs are cleaned up on startup.
• Packaging — a multi-stage Docker image (catubba/joulenap) with a healthcheck, a docker-compose example, and Proxmox LXC support.
• Config-driven via config.yaml (pydantic-validated); secrets stay in config.yaml and are redacted from API responses.