march 9-10

Makefile

@@ -1,6 +1,6 @@
 #
 #   EnergyMech, IRC Bot software
-#   Copyright (c) 1997-2009 proton
+#   Copyright (c) 1997-2018 proton
 #
 #   This program is free software; you can redistribute it and/or modify
 #   it under the terms of the GNU General Public License as published by
@@ -23,8 +23,8 @@ MISCFILES =	COPYING CREDITS README README.TCL TODO VERSIONS VERSIONS-1 Makefile
 HELPFILES =	help/8BALL help/ACCESS help/ALIAS help/AWAY help/BAN help/BANLIST help/BYE \
 		help/CCHAN help/CHACCESS help/CHANBAN help/CHANNELS help/CHAT help/CLEARSHIT \
 		help/CMD help/CORE help/CSERV help/CTCP help/CYCLE help/DEOP help/DIE \
-		help/DNS help/DNSSERVER help/DO help/DOWN help/ECHO help/ESAY help/FORGET \
+		help/DNS help/DNSSERVER help/DO help/DOWN help/ECHO help/ESAY help/FEATURES \
-		help/GREET help/HELP help/IDLE help/INSULT help/INVITE help/JOIN help/KB \
+		help/FORGET help/GREET help/HELP help/IDLE help/INSULT help/INVITE help/JOIN help/KB \
 		help/KICK help/KS help/LAST help/LEVELS help/LINK help/LOAD help/LUSERS help/ME \
 		help/MODE help/MSG help/NAMES help/NEXTSERVER help/NICK help/NOTIFY help/ONTIME \
 		help/OP help/PART help/PASSWD help/PROTECTION help/PYTHON help/PYTHONSCRIPT \
@@ -87,6 +87,11 @@ clean:		FORCE
 install:	FORCE
 		$(MAKE) -C src install
 
+mega:		FORCE
+		$(MAKE) -C src mega
+
+mega-install:	FORCE
+		$(MAKE) -C src mega-install
 #
 # packing things up for distribution
 #

README

@@ -48,15 +48,15 @@ Setup?
 
 Read the  sample.conf  file to  get  an idea of  the  config  file
 commands and then try to make your own.  A basic setup doesnt need
-much  more than  NICK,  ALTNICK,  SET USERFILE,  JOIN  and  SERVER
+much  more than NICK, SET ALTNICK, SET USERFILE,  JOIN and  SERVER
-entries, the rest is just tweaks of default values.
+entries, the rest is mostly just tweaks of default values.
 
 Quick steps:
 
 1) cp sample.conf mech.conf
 
-2) pico mech.conf
+2) edit mech.conf
--- replace ''pico'' with your favourite text editor,  look through
+-- replace ''edit'' with your favourite text editor,  look through
    the file for sections to change,  you will have to remove lines
    in order to get the bot to work. Check the file completely!
 
@@ -72,7 +72,7 @@ Quick steps:
 
    then 'run'  this file with  './energymech -f trick.conf'.  this
    will create a userfile  with the name  you chose ('mech.passwd'
-   is a good descriptive name which I usually use myself).
+   is a good descriptive name which I often use myself).
 
    re-use the filename  you selected in your  proper configuration
    file. and remember to 'rm -f mech.session' if you compiled your
@@ -95,6 +95,10 @@ Updated Files?
 ~~~~~~~~~~~~~~
 The main distro-site for the EnergyMech is:
 
+   https://github.com/MadCamel/energymech
+
+Files, documentation and tips can be found at:
+
    http://www.energymech.net
 
 ---*---
@@ -131,5 +135,4 @@ IT COMES TO CONFIGURING AND USING IT.
 
 ---*---
 
-proton, July 24th, 2009.
+joonicks, March 10th, 2018.
-<mailto:proton@energymech.net>

VERSIONS

@@ -1,5 +1,7 @@
 3.0.99p4 -- WORK IN PROGRESS (~March, 2018)
 
+ * Fixed: RawDNS, again...
+ * Fixed: Save procvars only once in session file.
  * Added: Support for SHA password hashes.
  * Added: ESAY $cap will display compile time capabilities.
  * Fixed: Potential memory corruption bug in do_user().

config/endian.c

@@ -0,0 +1,12 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+int main(int argc, char **argv)
+{
+  char x[4];
+  *((int*)&x) = 1;
+  printf("%i\n",x[0]);
+  return(0);
+}
+

configure

@@ -584,6 +584,40 @@ esac
 
 rm -f $TESTP
 
+#
+#  big/little endian
+#
+
+TESTC=config/endian.c
+
+if [ -z "$endian" ]; then
+  endian=unknown
+  echo $ac_n "checking endianness ... "$ac_c
+  $CC -o $TESTP $TESTC 1> /dev/null 2> /dev/null
+  if [ -x $TESTP ]; then
+    endian=`$TESTP`
+    if [ "$endian" == "1" ]; then
+      endian="little"
+    else
+      endian="big"
+    fi
+  fi
+  echo $ac_t "$endian endian"
+fi
+
+case "$endian" in
+  little )
+    LIT_END="#define LITTLE_ENDIAN"
+    BIG_END="#undef BIG_ENDIAN"
+    ;;
+  * )
+    LIT_END="#undef LITTLE_ENDIAN"
+    BIG_END="#define BIG_ENDIAN"
+    ;;
+esac
+
+rm -f $TESTP
+
 #
 #  Some processors like Sparc, will cause a bus error (SIGBUS) if you try to access unaligned memory
 #
@@ -1219,6 +1253,8 @@ s|@DEF_REDIRECT@|$def_redirect|;
      s|@DEF_WEB@|$def_web|;
  s|@DEF_WINGATE@|$def_wingate|;
 
+s|@LIT_END@|$LIT_END|;
+s|@BIG_END@|$BIG_END|;
 s|@DEF_CRYPT_FUNCTION@|$CRYPT_FUNCTION|;
 s|@CRYPT_HAS_SHA@|$CRYPT_HAS_SHA|;
 s|@CRYPT_HAS_MD5@|$CRYPT_HAS_MD5|;

help/CORE

@@ -1,4 +1,18 @@
  
 Shows core information about the bot.
 
-See also: ver, uptime, ontime
+Current nick        Nick of the bot you are connected to and its Guid.
+Users in userlist   Total number of userlist entries, as well as users with
+                    userlevel access (0-100) and bot level access (200).
+Active channels     Channels that the bot is active on, as well as channels
+                    that the bot is trying to rejoin.
+Current server      Which server the bot is connected to.
+Server ontime       How long the bot has been connected to the current server.
+Mode                User modes of the bot, like +i for invisible, etc.
+Current time        Time as reported by the machine that the bot is running on.
+Started             Time when the bot was first started.
+Uptime              How long (in days, hours, minutes and seconds) the bot has been running.
+Version             Source code version of the bot.
+Features            List of which features were compiled into the bot.
+
+See also: ver, uptime, ontime, features

help/FEATURES

@@ -0,0 +1,9 @@
+The Energymech contains a list of which features were included
+when the source was compiled.
+
+You can view this list at the command prompt in your shell with
+./(name of executable) -v
+
+Or, once the bot is started, with the command CORE or ESAY $cap
+
+See also: core, esay

help/SETMODES

@@ -4,3 +4,6 @@ Number of MODE operations that can be sent to the IRC server
 in a single line. This value can be auto-detected on server
 connect if the bot is compiled with support for 005 replies
 and the server sends them (most big networks today).
+
+To support auto-detect of server capabilities, the energymech
+needs to be compiled with the ircd-extensions feature enabled.

help/SPY

@@ -17,6 +17,6 @@ excess flood if not careful.
    (none)     Send output to you (default).
    channel    Send output to the specified channel.
    >file      Send output to file. Lines are appended to the end of the file.
-              If the file does not exist, it is created.
+              This file needs to exist before logging to it.
  
 See also: rspy

help/USER

@@ -22,6 +22,11 @@ Only one channel or one mask can be modified with each USER command.
  
 Prefix flags with a "-" to disable them or a "+" to enable them.
 
+Bots can be added to the userlist to be recognized by other bots.
+Use the special access level 200. No password is set for bots and is
+not needed because level 200 users can not execute any commands.
+They can not access bots by telnet either.
+ 
 User flags:
   AO         auto-op on/off
   AV         auto-voice on/off

public/README

@@ -0,0 +1 @@
+Store files here that you want to access with the SEND command.

src/Makefile.in

@@ -1,6 +1,6 @@
 #
 #   EnergyMech, IRC bot software
-#   Copyright (c) 1997-2009 proton
+#   Copyright (c) 1997-2018 proton
 #
 #   This program is free software; you can redistribute it and/or modify
 #   it under the terms of the GNU General Public License as published by
@@ -47,7 +47,7 @@ OFILES =	alias.o auth.o bounce.o chanban.o channel.o core.o \
 		kicksay.o main.o net.o net_chan.o note.o notify.o ons.o parse.o \
 		perl.o prot.o python.o redirect.o reset.o seen.o shit.o socket.o \
 		spy.o stats.o tcl.o telnet.o toybox.o trivia.o uptime.o \
-		user.o vars.o web.o @MD5_O@
+		user.o vars.o web.o @MD5_O@ @SHA_O@
 
 SRCFILES =	alias.c auth.c bounce.c chanban.c channel.c core.c \
 		ctcp.c debug.c dns.c dynamode.c function.c greet.c help.c irc.c \
@@ -58,7 +58,12 @@ SRCFILES =	alias.c auth.c bounce.c chanban.c channel.c core.c \
 
 all:		$(INSTALLNAME)
 
-mcmd.h:		gencmd.c config.h structs.h ;
+#
+#   mcmd.h is generated at compile time to wrap up all command attributes more efficiently,
+#   instead of doing extra parsing and handling while the bot is running.
+#
+
+mcmd.h:		gencmd.c config.h structs.h
 		$(CC) $(LFLAGS) -o gencmd gencmd.c
 		./gencmd > mcmd.h
 
@@ -74,17 +79,24 @@ $(INSTALLNAME):	$(OFILES)
 @oc@		$(CROSS_COMPILE)objcopy -R .note -R .comment $(INSTALLNAME)
 @sz@		size $(INSTALLNAME)
 
-mega:		$(SRCFILES) $(INCS) usage.h
+$(INSTALLNAME)-static:	$(OFILES)
-		$(CROSS_COMPILE)$(CC) $(CFLAGS) -o $(INSTALLNAME) mega.c $(LPROF) $(LIBS) $(LDSCRIPT) $(PYINCLUDE) $(TCLINCLUDE)
+		$(CROSS_COMPILE)$(CC) $(LFLAGS) -o $(INSTALLNAME) $(OFILES) $(LPROF) $(LIBS) $(LDSCRIPT) -static
 @oc@		$(CROSS_COMPILE)objcopy -R .note -R .comment $(INSTALLNAME)
 @sz@		size $(INSTALLNAME)
 
+
 #
-# static targets
+#  'mega' versions
+#  compiling the C files all at once (having all the code "visible" during the whole process) enables GCC to make more optimizations,
+#  resulting in a smaller, more efficient, binary. this process uses lots more memory at compile time.
 #
 
-$(INSTALLNAME)-static:	$(OFILES)
+mega-install:	mega $(SRCFILES) $(INCS) usage.h
-		$(CROSS_COMPILE)$(CC) $(LFLAGS) -o $(INSTALLNAME) $(OFILES) $(LPROF) $(LIBS) $(LDSCRIPT) -static
+		$(CHMOD) $(INSTALLMODE) $(INSTALLNAME)
+		$(MV) $(INSTALLNAME) $(INSTALLDIR)
+
+mega:		$(SRCFILES) $(INCS) usage.h
+		$(CROSS_COMPILE)$(CC) $(CFLAGS) -o $(INSTALLNAME) mega.c $(LPROF) $(LIBS) $(LDSCRIPT) $(PYINCLUDE) $(TCLINCLUDE)
 @oc@		$(CROSS_COMPILE)objcopy -R .note -R .comment $(INSTALLNAME)
 @sz@		size $(INSTALLNAME)
 
@@ -220,4 +232,7 @@ web.o:		web.c $(INCS)
 md5/md5.o:	md5/md5.c $(INCS)
 		$(CROSS_COMPILE)$(CC) $(CFLAGS) -c $< -o $@ -Imd5 $(CPROF)
 
+sha/sha1.o:	sha/sha1.c $(INCS)
+		$(CROSS_COMPILE)$(CC) $(CFLAGS) -c $< -o $@ -Isha1 $(CPROF)
+
 FORCE:

src/config.h.in

@@ -378,6 +378,15 @@
  */
 #define RANDOM(min,max)			(min + (rand() / (RAND_MAX / (max - min + 1))))
 
+/* endianness */
+#ifndef LITTLE_ENDIAN
+@LIT_END@
+#endif /* LITTLE_ENDIAN */
+
+#ifndef BIG_ENDIAN
+@BIG_END@
+#endif /* BIG_ENDIAN */
+
 /* unaligned memory access */
 @UNALIGNED_MEM@
 

src/core.c

@@ -244,9 +244,9 @@ int write_session(void)
 		 */
 		for(j=0;VarName[j].name;j++)
 		{
-			varval = &bot->setting[j];
 			if (IsProc(j))
-				varval = varval->proc_var;
+				continue;
+			varval = &bot->setting[j];
 			if (IsChar(j))
 			{
 				if (VarName[j].v.num != varval->char_var)
@@ -1208,8 +1208,10 @@ void do_core(COMMAND_ARGS)
 	}
 
 	i = Strcmp(current->nick,current->wantnick);
-	table_buffer((i) ? TEXT_CURRNICKWANT : TEXT_CURRNICKHAS,current->nick,current->wantnick);
+	if (i)
-	table_buffer(TEXT_CURRGUID,current->guid);
+		table_buffer(TEXT_CURRNICKWANT,current->nick,current->wantnick,current->guid);
+	else
+		table_buffer(TEXT_CURRNICKHAS,current->nick,current->guid);
 	table_buffer(TEXT_USERLISTSTATS,u,su,EXTRA_CHAR(su),bu,EXTRA_CHAR(bu));
 
 	pt = tmp;
@@ -1382,12 +1384,12 @@ void do_server(COMMAND_ARGS)
 	ServerGroup *sg;
 	Server	*sp,*dp,**spp;
 	char	*server,*aport,*pass;
-	char	addc,*last,*quitmsg = "Trying new server, brb...";
+	char	addc,*last,*quitmsg = TEXT_TRYNEWSERVER;
 	int	n,iport,sgi;
 
 	if (CurrentCmd->name == C_NEXTSERVER)
 	{
-		quitmsg = "Switching servers...";
+		quitmsg = TEXT_SWITCHSERVER;
 		to_user(from,FMT_PLAIN,quitmsg);
 		goto do_server_jump;
 	}

src/defines.h

@@ -303,6 +303,7 @@ enum {
 #define BNAUTH_PLAINTEXT	0
 #define BNAUTH_DES		1
 #define BNAUTH_MD5		2
+#define BNAUTH_SHA		3
 
 #endif /* BOTNET */
 

src/dns.c

@@ -1,7 +1,7 @@
 /*
 
     EnergyMech, IRC bot software
-    Copyright (c) 1997-2009 proton
+    Copyright (c) 1997-2018 proton
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -64,25 +64,7 @@ LS int dnsserver = 0;
 
 #ifdef DEBUG
 char *type_textlist[] =
-{
+{ NULL, "A", "NS", "MD", "MF", "CNAME", "SOA", "MB", "MG", "MR", "NULL", "WKS", "PTR", "HINFO", "MINFO", "MX", "TXT", };
-NULL,
-"A",
-"NS",
-"MD",
-"MF",
-"CNAME",
-"SOA",
-"MB",
-"MG",
-"MR",
-"NULL",
-"WKS",
-"PTR",
-"HINFO",
-"MINFO",
-"MX",
-"TXT",
-};
 #endif /* DEBUG */
 
 void init_rawdns(void)
@@ -164,17 +146,17 @@ const char *get_dns_token(const char *src, const char *packet, char *dst, int sz
 
 int make_query(char *packet, const char *hostname)
 {
+	dnsQuery *h;
 	char	*size,*dst;
 
 	/*
 	 *  make a packet
 	 */
-	packet[0] = rand() >> 24;
+	memset(packet,0,12);
-	packet[1] = rand() >> 24;
+	h = (dnsQuery*)packet;
-	packet[2] = 1; // RD, recursion desired flag
+	h->qid = rand() & 0xffff;
-	packet[3] = 0;
+	h->flags = htons(0x0100);; // Query = 0, Recursion Desired = 1
-	((ulong*)packet)[1] = htonl(0x10000);
+	h->questions = htons(1);
-	((ulong*)packet)[2] = 0;
 	size = packet + 12;
 	dst  = size + 1;
 	while(*hostname)
@@ -932,6 +914,9 @@ flipstep:
 		return;
 	}
 
+	if (to && *to == '#')
+		make_ireq(PA_DNS,to,host);
+	else
 		make_ireq(PA_DNS,from,host);
 	rawdns(host);
 }

src/net.c

@@ -30,12 +30,18 @@
 #include "text.h"
 #include "mcmd.h"
 
-#ifdef MD5CRYPT
+#if defined(SHACRYPT) || defined(MD5CRYPT)
-#define md5banneropt " MD5"
 char *CRYPT_FUNC(const char *, const char *);
-#else
+#endif
-#define md5banneropt
+
+const char banneropt[] = "BB%i %i PTA"
+#ifdef SHACRYPT
+	" SHA"
+#endif /* SHACRYPT */
+#ifdef MD5CRYPT
+	" MD5"
 #endif /* MD5CRYPT */
+	"\n";
 
 #ifdef TELNET
 char *telnetprompt = TEXT_ENTERNICKNAME;
@@ -307,6 +313,10 @@ void basicAuth(BotNet *bn, char *rest)
 	{
 		if (!Strcmp(pass,"PTA"))
 			authtype = BNAUTH_PLAINTEXT;
+#ifdef SHACRYPT
+		if (!Strcmp(pass,"SHA"))
+			authtype = BNAUTH_SHA;
+#endif /* SHACRYPT */
 #ifdef MD5CRYPT
 		if (!Strcmp(pass,"MD5"))
 			authtype = BNAUTH_MD5;
@@ -334,6 +344,26 @@ void basicAuth(BotNet *bn, char *rest)
 		if (Strcmp(pass,rest))
 			goto badpass;
 		break;
+#ifdef SHACRYPT
+	case BNAUTH_SHA:
+		if (linkpass && *linkpass)
+		{
+			char	*enc,temppass[24 + Strlen2(pass,linkpass)]; // linkpass is never NULL
+
+			/* "mypass theirpass REMOTEsid LOCALsid" */
+			sprintf(temppass,"%s %s %i %i",linkpass,pass,bn->rsid,bn->lsid);
+#ifdef DEBUG
+			debug(">> sha pass exchange: \"%s\"\n",temppass);
+#endif /* DEBUG */
+			enc = CRYPT_FUNC(temppass,rest);
+#ifdef DEBUG
+			debug("(basicAuth) their = %s, mypass = %s :: sha = %s\n",
+				pass,linkpass,enc);
+#endif /* DEBUG */
+			if (!Strcmp(enc,rest))
+				break;
+		}
+#endif /* SHACRYPT */
 #ifdef MD5CRYPT
 	case BNAUTH_MD5:
 		if (linkpass && *linkpass)
@@ -492,6 +522,10 @@ void basicBanner(BotNet *bn, char *rest)
 	{
 		if (!Strcmp(p,"PTA"))
 			bn->opt.pta = TRUE;
+#ifdef SHACRYPT
+		if (!Strcmp(p,"SHA"))
+			bn->opt.sha = TRUE;
+#endif /* SHACRYPT */
 #ifdef MD5CRYPT
 		if (!Strcmp(p,"MD5"))
 			bn->opt.md5 = TRUE;
@@ -510,7 +544,7 @@ void basicBanner(BotNet *bn, char *rest)
 	if (bn->status == BN_UNKNOWN)
 	{
 		bn->controller = netbot = get_netbot();
-		to_file(bn->sock,"BB%i %i PTA" md5banneropt "\n",netbot->guid,bn->lsid);
+		to_file(bn->sock,banneropt,netbot->guid,bn->lsid);
 		bn->status = BN_WAITAUTH;
 		return;
 	}
@@ -533,12 +567,37 @@ void basicBanner(BotNet *bn, char *rest)
 	if (bn->opt.md5 && (BNAUTH_MD5 > authtype))
 		authtype = BNAUTH_MD5;
 #endif /* MD5CRYPT */
+#ifdef SHACRYPT
+	if (bn->opt.sha && (BNAUTH_SHA > authtype))
+		authtype = BNAUTH_SHA;
+#endif /* SHACRYPT */
 
 	switch(authtype)
 	{
 	case BNAUTH_PLAINTEXT:
 		to_file(bn->sock,"BAPTA %s\n",linkpass);
 		break;
+#ifdef SHACRYPT
+	case BNAUTH_SHA:
+		if ((cfg = find_netcfg(guid)))
+		{
+			if (cfg->pass && *cfg->pass)
+			{
+				char	*enc,salt[8];
+				char	temppass[24 + Strlen2(cfg->pass,linkpass)]; // linkpass(procvar) is not NULL
+
+				/* "theirpass mypass LOCALsid REMOTEsid" */
+				sprintf(temppass,"%s %s %i %i",cfg->pass,linkpass,bn->lsid,bn->rsid);
+#ifdef DEBUG
+				debug(">> sha pass exchange: \"%s\"\n",temppass);
+#endif /* DEBUG */
+				sprintf(salt,"$6$%04x",(rand() >> 16));
+				enc = CRYPT_FUNC(temppass,salt);
+				to_file(bn->sock,"BASHA %s\n",enc);
+				break;
+			}
+		}
+#endif /* SHACRYPT */
 #ifdef MD5CRYPT
 	case BNAUTH_MD5:
 		if ((cfg = find_netcfg(guid)))
@@ -1320,7 +1379,7 @@ void process_botnet(void)
 		{
 			bn->lsid = rand();
 			bn->controller = netbot = get_netbot();
-			if (to_file(bn->sock,"BB%i %i PTA" md5banneropt "\n",netbot->guid,bn->lsid) < 0)
+			if (to_file(bn->sock,banneropt,netbot->guid,bn->lsid) < 0)
 			{
 				botnet_deaduplink(bn);
 			}

src/spy.c

@@ -471,7 +471,15 @@ rspy_usage:
 			 *  Dont just open anything.
 			 */
 			if (!is_safepath(dest))
+#ifdef NEWBIE
+			{
+				usage(from);
+				to_user(from,"File/path does not exist or is inaccessible");
+				return;
+			}
+#else
 				goto rspy_usage;
+#endif /* NEWBIE */
 			t_dest = SPY_FILE;
 			goto rspy_dest_ok;
 		}

src/structs.h

@@ -668,8 +668,9 @@ typedef struct BotNet
 
 	struct
 	{
-	ulong		pta:1;		/* plain text auth	*/
+	ulong		pta:1,		/* plain text auth	*/
-	ulong		md5:1;		/* md5 */
+			sha:1,		/* SHA */
+			md5:1;		/* MD5 */
 
 	} opt;
 

src/text.h

@@ -1,7 +1,7 @@
 /*
 
     EnergyMech, IRC bot software
-    Copyright (c) 2000-2009 proton
+    Copyright (c) 2000-2018 proton
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -74,9 +74,8 @@
 #define TEXT_SERVERDELETED	"Server has been deleted: %s:%i"
 #define TEXT_MANYSERVMATCH	"Several entries for %s exists, please specify port also"
 /* do_core() */
-#define TEXT_CURRNICKWANT	"Current nick\t%s (Wanted: %s)"
+#define TEXT_CURRNICKWANT	"Current nick\t%s (Wanted: %s) [#%i]"
-#define TEXT_CURRNICKHAS	"Current nick\t%s"
+#define TEXT_CURRNICKHAS	"Current nick\t%s [#%i]"
-#define TEXT_CURRGUID		"Guid\t%i"
 #define TEXT_USERLISTSTATS	"Users in userlist\t%i (%i Superuser%s, %i Bot%s)"
 #define TEXT_ACTIVECHANS	"Active channels\t%s"
 #define TEXT_MOREACTIVECHANS	"\t%s"
@@ -87,6 +86,8 @@
 
 #define TEXT_CURRSERVER		"Current Server\t%s:%i"
 #define TEXT_CURRSERVERNOT	"Current Server\t" TEXT_NOTINSERVLIST
+#define TEXT_TRYNEWSERVER	"Trying new server, brb..."
+#define TEXT_SWITCHSERVER	"Switching servers..."
 #define TEXT_SERVERONTIME	"Server Ontime\t%s"
 #define TEXT_BOTMODES		"Mode\t+%s"