SuperClaude/setup/cli/commands/uninstall.py
Mithun Gowda B 89a5cf33d6
Fixes and improvement (#378)
* Fix: Install only selected MCP servers and ensure valid empty backups

This commit addresses two separate issues:

1.  **MCP Installation:** The `install` command was installing all MCP servers instead of only the ones selected by the user. The `_install` method in `setup/components/mcp.py` was iterating through all available servers, not the user's selection. This has been fixed to respect the `selected_mcp_servers` configuration. A new test has been added to verify this fix.

2.  **Backup Creation:** The `create_backup` method in `setup/core/installer.py` created an invalid `.tar.gz` file when the backup source was empty. This has been fixed to ensure that a valid, empty tar archive is always created. A test was added for this as well.
Co-authored-by: Mithun Gowda B <mithungowda.b7411@gmail.com>
Co-authored-by: Jules <jules-ai-assistant@users.noreply.github.com>

* Fix: Correct installer validation for MCP and MCP Docs components

This commit fixes a validation issue in the installer where it would incorrectly fail after a partial installation of MCP servers.

The `MCPComponent` validation logic was checking for all "required" servers, regardless of whether they were selected by the user. This has been corrected to only validate the servers that were actually installed, by checking against the list of installed servers stored in the metadata. The metadata storage has also been fixed to only record the installed servers.

The `MCPDocsComponent` was failing validation because it was not being registered in the metadata if no documentation files were installed. This has been fixed by ensuring the post-installation hook runs even when no files are copied.

New tests have been added for both components to verify the corrected logic.

Co-authored-by: Mithun Gowda B <mithungowda.b7411@gmail.com>
Co-authored-by: Jules <jules-ai-assistant@users.noreply.github.com>

* Fix: Allow re-installation of components and correct validation logic

This commit fixes a bug that prevented new MCP servers from being installed on subsequent runs of the installer. It also fixes the validation logic that was causing failures after a partial installation.

The key changes are:
1.  A new `is_reinstallable` method has been added to the base `Component` class. This allows certain components (like the `mcp` component) to be re-run even if they are already marked as installed.
2.  The installer logic has been updated to respect this new method.
3.  The `MCPComponent` now correctly stores only the installed servers in the metadata.
4.  The validation logic for `MCPComponent` and `MCPDocsComponent` has been corrected to prevent incorrect failures.

New tests have been added to verify all aspects of the new logic.

Co-authored-by: Mithun Gowda B <mithungowda.b7411@gmail.com>
Co-authored-by: Jules <jules-ai-assistant@users.noreply.github.com>

* feat: Display authors in UI header and update author info

This commit implements the user's request to display author names and emails in the UI header of the installer.

The key changes are:
1.  The `__email__` field in `SuperClaude/__init__.py` has been updated to include both authors' emails.
2.  The `display_header` function in `setup/utils/ui.py` has been modified to read the author and email information and display it.
3.  A new test has been added to `tests/test_ui.py` to verify the new UI output.

Co-authored-by: Mithun Gowda B <mithungowda.b7411@gmail.com>
Co-authored-by: Jules <jules-ai-assistant@users.noreply.github.com>

* feat: Version bump to 4.1.0 and various fixes

This commit prepares the project for the v4.1.0 release. It includes a version bump across all relevant files and incorporates several bug fixes and feature enhancements from recent tasks.

Key changes in this release:

- **Version Bump**: The project version has been updated from 4.0.9 to 4.1.0 in all configuration files, documentation, and source code.

- **Installer Fixes**:
  - Components can now be marked as `reinstallable`, allowing them to be re-run on subsequent installations. This fixes a bug where new MCP servers could not be added.
  - The validation logic for `mcp` and `mcp_docs` components has been corrected to avoid incorrect failures.
  - A bug in the backup creation process that created invalid empty archives has been fixed.

- **UI Enhancements**:
  - Author names and emails are now displayed in the installer UI header.

- **Metadata Updates**:
  - Mithun Gowda B has been added as an author.

- **New Tests**:
  - Comprehensive tests have been added for the installer logic, MCP components, and UI changes to ensure correctness and prevent regressions.

Co-authored-by: Mithun Gowda B <mithungowda.b7411@gmail.com>
Co-authored-by: Jules <jules-ai-assistant@users.noreply.github.com>

* fix: Resolve dependencies for partial installs and other fixes

This commit addresses several issues, the main one being a dependency resolution failure during partial installations.

Key changes:
- **Dependency Resolution**: The installer now correctly resolves the full dependency tree when a user requests to install a subset of components. This fixes the "Unknown component: core" error.
- **Component Re-installation**: A new `is_reinstallable` flag allows components like `mcp` to be re-run on subsequent installs, enabling the addition of new servers.
- **Validation Logic**: The validation for `mcp` and `mcp_docs` has been corrected to avoid spurious failures.
- **UI and Metadata**: Author information has been added to the UI header and source files.
- **Version Bump**: The project version has been updated to 4.1.0.
- **Tests**: New tests have been added to cover all the above changes.

Co-authored-by: Mithun Gowda B <mithungowda.b7411@gmail.com>
Co-authored-by: Jules <jules-ai-assistant@users.noreply.github.com>

* fix: Installer fixes and version bump to 4.1.0

This commit includes a collection of fixes for the installer logic, UI enhancements, and a version bump to 4.1.0.

Key changes:
- **Dependency Resolution**: The installer now correctly resolves the full dependency tree for partial installations, fixing the "Unknown component: core" error.
- **Component Re-installation**: A new `is_reinstallable` flag allows components like `mcp` to be re-run to add new servers.
- **MCP Installation**: The non-interactive installation of the `mcp` component now correctly prompts the user to select servers.
- **Validation Logic**: The post-installation validation logic has been corrected to only validate components from the current session and to use the correct list of installed servers.
- **UI & Metadata**: Author information has been added to the UI and source files.
- **Version Bump**: The project version has been updated from 4.0.9 to 4.1.0 across all files.
- **Tests**: New tests have been added to cover all the bug fixes.

Co-authored-by: Mithun Gowda B <mithungowda.b7411@gmail.com>
Co-authored-by: Jules <jules-ai-assistant@users.noreply.github.com>

* feat: Add --authors flag and multiple installer fixes

This commit introduces the `--authors` flag to display author information and includes a collection of fixes for the installer logic.

Key changes:
- **New Feature**: Added an `--authors` flag that displays the names, emails, and GitHub usernames of the project authors.
- **Dependency Resolution**: Fixed a critical bug where partial installations would fail due to unresolved dependencies.
- **Component Re-installation**: Added a mechanism to allow components to be "reinstallable", fixing an issue that prevented adding new MCP servers on subsequent runs.
- **MCP Installation**: The non-interactive installation of the `mcp` component now correctly prompts for server selection.
- **Validation Logic**: Corrected the post-installation validation to prevent spurious errors.
- **Version Bump**: The project version has been updated to 4.1.0.
- **Metadata**: Author and GitHub information has been added to the source files.
- **UI**: The installer header now displays author information.
- **Tests**: Added new tests for all new features and bug fixes.

Co-authored-by: Mithun Gowda B <mithungowda.b7411@gmail.com>
Co-authored-by: Jules <jules-ai-assistant@users.noreply.github.com>

* Add Docker support and framework enhancements

- Add serena-docker.json MCP configuration
- Update MCP configs and installer components
- Enhance CLI commands with new functionality
- Add symbols utility for framework operations
- Improve UI and logging components

🤖 Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)

Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>

* Bump version from 4.1.1 to 4.1.2

- Update version across all package files
- Update documentation and README files
- Update Python module version strings
- Update feature configuration files

🤖 Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)

Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Co-Authored-By: Mithun Gowda B <mithungowda.b7411@gmail.com>

* Bump version from 4.1.2 to 4.1.3

- Update version across all package files
- Update documentation and README files
- Update Python module version strings
- Update feature configuration files

🤖 Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)

Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Co-Authored-By: Mithun Gowda B <mithungowda.b7411@gmail.com>

* Fix home directory detection for immutable distros

- Add get_home_directory() function to handle /var/home/$USER paths
- Support Fedora Silverblue, Universal Blue, and other immutable distros
- Replace all Path.home() calls throughout the setup system
- Add fallback methods for edge cases and compatibility
- Create test script for immutable distro validation

Fixes:
- Incorrect home path detection on immutable Linux distributions
- Installation failures on Fedora Silverblue/Universal Blue
- Issues with Claude Code configuration paths

Technical changes:
- New get_home_directory() in utils/environment.py
- Updated all CLI commands, validators, and core components
- Maintains backward compatibility with standard systems
- Robust fallback chain for edge cases

🤖 Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)

Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Co-Authored-By: Mithun Gowda B <mithungowda.b7411@gmail.com>

* Fix circular import and complete immutable distro support

- Move get_home_directory() to separate paths.py module
- Resolve circular import between environment.py and logger.py
- Update all import statements across the setup system
- Verify functionality with comprehensive testing

Technical changes:
- Created setup/utils/paths.py for path utilities
- Updated imports in all affected modules
- Maintains full backward compatibility
- Fixes installation on immutable distros

Testing completed:
-  Basic home directory detection works
-  Installation system integration works
-  Environment utilities integration works
-  Immutable distro logic validated

🤖 Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)

Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>
Co-Authored-By: Mithun Gowda B <mithungowda.b7411@gmail.com>

* Fix mcp_docs installation bugs

- Fix mcp_docs component incorrectly marking as installed when no MCP servers selected
- Add MCP server selection prompt when mcp_docs component is explicitly requested
- Return False instead of calling _post_install() when no servers selected or files found
- Add user-friendly warning when mcp_docs requested without server selection
- Remove mcp_docs from installation when no servers are available

🤖 Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)

Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>

* Fix MCP server name mapping for documentation files

- Add mapping for sequential-thinking -> MCP_Sequential.md
- Add mapping for morphllm-fast-apply -> MCP_Morphllm.md
- Ensures mcp_docs installation works with all MCP server naming conventions

🤖 Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)

Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>

* Enable mcp_docs component reinstallation

- Add is_reinstallable() method returning True to allow repeat installations
- Fixes issue where mcp_docs was skipped on subsequent installation attempts
- Enables users to change MCP server selections and update documentation

🤖 Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)

Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>

* Fix repeat installation issues for mcp_docs

- Ensure mcp component is auto-added when mcp_docs is selected with servers
- Fix component_files tracking to only include successfully copied files
- Ensures CLAUDE.md gets properly updated with MCP documentation imports
- Fixes issue where MCP servers weren't installed on repeat attempts

🤖 Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)

Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>

* Fix MCP component metadata tracking and debug logging

- Fix servers_count to track actually installed servers instead of total available
- Add installed_servers list to metadata for better tracking
- Add debug logging to trace component auto-addition
- Ensures MCP component appears properly in metadata when servers are installed

🤖 Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)

Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>

* Fix pyproject.toml license format and add missing classifier

- Fix license format from string to {text = "MIT"} format
- Add missing "License :: OSI Approved :: MIT License" classifier
- Fix indentation consistency in classifiers section
- Resolves setup.py installation errors and PEP 621 compliance

🤖 Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)

Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>

* Fix MCP incremental installation and auto-detection system

PROBLEM FIXED:
- MCP component only registered servers selected during current session
- mcp_docs component only installed docs for newly selected servers
- Users had to reinstall everything when adding new MCP servers
- Installation failed if no servers selected but servers existed

SOLUTION IMPLEMENTED:
- Add auto-detection of existing MCP servers from config files (.claude.json, claude_desktop_config.json)
- Add CLI detection via 'claude mcp list' output parsing
- Add smart server merging (existing + selected + previously installed)
- Add server name normalization for common variations
- Fix CLI logic to allow mcp_docs installation without server selection
- Add graceful error handling for corrupted configs

KEY FEATURES:
 Auto-detects existing MCP servers from multiple config locations
 Supports incremental installation (add new servers without breaking existing)
 Works with or without --install-dir argument
 Handles server name variations (sequential vs sequential-thinking, etc.)
 Maintains metadata persistence across installation sessions
 Graceful fallback when config files are corrupted
 Compatible with both interactive and non-interactive modes

TESTED SCENARIOS:
- Fresh installation with no MCP servers 
- Auto-detection with existing servers 
- Incremental server additions 
- Mixed mode (new + existing servers) 
- Error handling with corrupted configs 
- Default vs custom installation directories 
- Interactive vs command-line modes 

Files changed:
- setup/cli/commands/install.py: Allow mcp_docs auto-detection mode
- setup/components/mcp.py: Add comprehensive auto-detection logic
- setup/components/mcp_docs.py: Add auto-detection for documentation

🤖 Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)

Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>

* Integrate SuperClaude framework flags into help command

ENHANCEMENT:
- Add comprehensive flag documentation to /sc:help command
- Include all 25 SuperClaude framework flags with descriptions
- Organize flags into logical categories (Mode, MCP, Analysis, Execution, Output)
- Add practical usage examples showing flag combinations
- Include flag priority rules and precedence hierarchy

NEW SECTIONS ADDED:
 Mode Activation Flags (5 flags): --brainstorm, --introspect, --task-manage, --orchestrate, --token-efficient
 MCP Server Flags (8 flags): --c7, --seq, --magic, --morph, --serena, --play, --all-mcp, --no-mcp
 Analysis Depth Flags (3 flags): --think, --think-hard, --ultrathink
 Execution Control Flags (6 flags): --delegate, --concurrency, --loop, --iterations, --validate, --safe-mode
 Output Optimization Flags (3 flags): --uc, --scope, --focus
 Flag Priority Rules: Clear hierarchy and precedence guidelines
 Usage Examples: 4 practical examples showing real-world flag combinations

IMPACT:
- Users can now discover all SuperClaude capabilities from /sc:help
- Single source of truth for commands AND flags
- Improved discoverability of advanced features
- Clear guidance on flag usage and combinations
- Help content nearly doubled (68 → 148 lines) with valuable reference information

Files changed:
- SuperClaude/Commands/help.md: Integrate FLAGS.md content with structured tables and examples

🤖 Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)

Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>

* Remove non-existent commands from modes.md documentation

PROBLEM FIXED:
- Documentation contained references to fake/non-existent commands
- Commands like sc:fix, sc:simple-pix, sc:update, sc:develop, sc:modernize, sc:simple-fix don't exist in CLI
- Confusing users who try to use these commands and get errors
- Inconsistency between documentation and actual SuperClaude command availability

COMMANDS REMOVED/REPLACED:
 /sc:simple-fix →  /sc:troubleshoot (real command)
 /sc:develop →  /sc:implement (real command)
 /sc:modernize →  /sc:improve (real command)

AFFECTED FILES:
- Docs/User-Guide/modes.md: Fixed all non-existent command references
- Docs/User-Guide-jp/modes.md: Fixed Japanese translation with same issues
- Docs/User-Guide-zh/modes.md: Fixed Chinese translation with same issues

VERIFICATION:
 All remaining /sc: commands verified to exist in SuperClaude/Commands/
 No more references to fake commands in any language version
 Examples now use only real, working SuperClaude commands
 User experience improved - no more confusion from non-working commands

REAL COMMANDS REFERENCED:
- /sc:analyze, /sc:brainstorm, /sc:help, /sc:implement
- /sc:improve, /sc:reflect, /sc:troubleshoot
- All verified to exist in CLI implementation

🤖 Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)

Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>

* Version bump to 4.1.4

CHANGELOG:
 Added comprehensive flag documentation to /sc:help command
 Fixed MCP incremental installation and auto-detection system
 Cleaned up documentation by removing non-existent commands
 Enhanced user experience with complete capability reference

VERSION UPDATES:
- Updated VERSION file: 4.1.3 → 4.1.4
- Updated pyproject.toml: 4.1.3 → 4.1.4
- Updated package.json: 4.1.3 → 4.1.4
- Updated all Python __init__.py fallback versions
- Updated all documentation references across all languages
- Updated setup/data/features.json component versions
- Updated CHANGELOG.md with comprehensive 4.1.4 release notes

SCOPE OF CHANGES:
📦 Core files: VERSION, pyproject.toml, package.json, __init__.py files
📚 Documentation: All .md files across English, Japanese, Chinese
🔧 Setup files: features.json, base.py version references
📝 Project files: README files, CHANGELOG, SECURITY, CONTRIBUTING

VERIFICATION:
 No remaining 4.1.3 references found
 29 files now properly reference 4.1.4
 All language versions consistently updated
 Package metadata properly versioned for distribution

🤖 Generated with [Claude Code](https://claude.ai/code)
via [Happy](https://happy.engineering)

Co-Authored-By: Claude <noreply@anthropic.com>
Co-Authored-By: Happy <yesreply@happy.engineering>

---------

Co-authored-by: google-labs-jules[bot] <161369871+google-labs-jules[bot]@users.noreply.github.com>
Co-authored-by: Jules <jules-ai-assistant@users.noreply.github.com>
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Happy <yesreply@happy.engineering>
2025-09-20 14:08:42 +05:30

883 lines
33 KiB
Python

"""
SuperClaude Uninstall Operation Module
Refactored from uninstall.py for unified CLI hub
"""
import sys
import time
from pathlib import Path
from ...utils.paths import get_home_directory
from typing import List, Optional, Dict, Any
import argparse
from ...core.registry import ComponentRegistry
from ...services.settings import SettingsService
from ...services.files import FileService
from ...utils.ui import (
display_header, display_info, display_success, display_error,
display_warning, Menu, confirm, ProgressBar, Colors
)
from ...utils.environment import get_superclaude_environment_variables, cleanup_environment_variables
from ...utils.logger import get_logger
from ... import DEFAULT_INSTALL_DIR, PROJECT_ROOT
from . import OperationBase
def verify_superclaude_file(file_path: Path, component: str) -> bool:
"""
Verify this is a SuperClaude file before removal
Args:
file_path: Path to the file to verify
component: Component name this file belongs to
Returns:
True if safe to remove, False if uncertain (preserve by default)
"""
try:
# Known SuperClaude file patterns by component
superclaude_patterns = {
'core': [
'CLAUDE.md', 'FLAGS.md', 'PRINCIPLES.md', 'RULES.md',
'ORCHESTRATOR.md', 'SESSION_LIFECYCLE.md'
],
'commands': [
# Commands are only in sc/ subdirectory
],
'agents': [
'backend-engineer.md', 'brainstorm-PRD.md', 'code-educator.md',
'code-refactorer.md', 'devops-engineer.md', 'frontend-specialist.md',
'performance-optimizer.md', 'python-ultimate-expert.md', 'qa-specialist.md',
'root-cause-analyzer.md', 'security-auditor.md', 'system-architect.md',
'technical-writer.md'
],
'modes': [
'MODE_Brainstorming.md', 'MODE_Introspection.md',
'MODE_Task_Management.md', 'MODE_Token_Efficiency.md'
],
'mcp_docs': [
'MCP_Context7.md', 'MCP_Sequential.md', 'MCP_Magic.md',
'MCP_Playwright.md', 'MCP_Morphllm.md', 'MCP_Serena.md'
]
}
# For commands component, verify it's in the sc/ subdirectory
if component == 'commands':
return 'commands/sc/' in str(file_path)
# For other components, check against known file lists
if component in superclaude_patterns:
filename = file_path.name
return filename in superclaude_patterns[component]
# For MCP component, it doesn't remove files but modifies .claude.json
if component == 'mcp':
return True # MCP component has its own safety logic
# Default to preserve if uncertain
return False
except Exception:
# If any error occurs in verification, preserve the file
return False
def verify_directory_safety(directory: Path, component: str) -> bool:
"""
Verify it's safe to remove a directory
Args:
directory: Directory path to verify
component: Component name
Returns:
True if safe to remove (only if empty or only contains SuperClaude files)
"""
try:
if not directory.exists():
return True
# Check if directory is empty
contents = list(directory.iterdir())
if not contents:
return True
# Check if all contents are SuperClaude files for this component
for item in contents:
if item.is_file():
if not verify_superclaude_file(item, component):
return False
elif item.is_dir():
# Don't remove directories that contain non-SuperClaude subdirectories
return False
return True
except Exception:
# If any error occurs, preserve the directory
return False
class UninstallOperation(OperationBase):
"""Uninstall operation implementation"""
def __init__(self):
super().__init__("uninstall")
def register_parser(subparsers, global_parser=None) -> argparse.ArgumentParser:
"""Register uninstall CLI arguments"""
parents = [global_parser] if global_parser else []
parser = subparsers.add_parser(
"uninstall",
help="Remove SuperClaude framework installation",
description="Uninstall SuperClaude Framework components",
epilog="""
Examples:
SuperClaude uninstall # Interactive uninstall
SuperClaude uninstall --components core # Remove specific components
SuperClaude uninstall --complete --force # Complete removal (forced)
SuperClaude uninstall --keep-backups # Keep backup files
""",
formatter_class=argparse.RawDescriptionHelpFormatter,
parents=parents
)
# Uninstall mode options
parser.add_argument(
"--components",
type=str,
nargs="+",
help="Specific components to uninstall"
)
parser.add_argument(
"--complete",
action="store_true",
help="Complete uninstall (remove all files and directories)"
)
# Data preservation options
parser.add_argument(
"--keep-backups",
action="store_true",
help="Keep backup files during uninstall"
)
parser.add_argument(
"--keep-logs",
action="store_true",
help="Keep log files during uninstall"
)
parser.add_argument(
"--keep-settings",
action="store_true",
help="Keep user settings during uninstall"
)
# Safety options
parser.add_argument(
"--no-confirm",
action="store_true",
help="Skip confirmation prompts (use with caution)"
)
# Environment cleanup options
parser.add_argument(
"--cleanup-env",
action="store_true",
help="Remove SuperClaude environment variables"
)
parser.add_argument(
"--no-restore-script",
action="store_true",
help="Skip creating environment variable restore script"
)
return parser
def get_installed_components(install_dir: Path) -> Dict[str, Dict[str, Any]]:
"""Get currently installed components and their versions"""
try:
settings_manager = SettingsService(install_dir)
return settings_manager.get_installed_components()
except Exception:
return {}
def get_installation_info(install_dir: Path) -> Dict[str, Any]:
"""Get detailed installation information"""
info = {
"install_dir": install_dir,
"exists": False,
"components": {},
"directories": [],
"files": [],
"total_size": 0
}
if not install_dir.exists():
return info
info["exists"] = True
info["components"] = get_installed_components(install_dir)
# Scan installation directory
try:
for item in install_dir.rglob("*"):
if item.is_file():
info["files"].append(item)
info["total_size"] += item.stat().st_size
elif item.is_dir():
info["directories"].append(item)
except Exception:
pass
return info
def display_environment_info() -> Dict[str, str]:
"""Display SuperClaude environment variables and return them"""
env_vars = get_superclaude_environment_variables()
if env_vars:
print(f"\n{Colors.CYAN}{Colors.BRIGHT}Environment Variables{Colors.RESET}")
print("=" * 50)
print(f"{Colors.BLUE}SuperClaude API key environment variables found:{Colors.RESET}")
for env_var, value in env_vars.items():
# Show only first few and last few characters for security
masked_value = f"{value[:4]}...{value[-4:]}" if len(value) > 8 else "***"
print(f" {env_var}: {masked_value}")
print(f"\n{Colors.YELLOW}Note: These environment variables will remain unless you use --cleanup-env{Colors.RESET}")
else:
print(f"\n{Colors.GREEN}No SuperClaude environment variables found{Colors.RESET}")
return env_vars
def display_uninstall_info(info: Dict[str, Any]) -> None:
"""Display installation information before uninstall"""
print(f"\n{Colors.CYAN}{Colors.BRIGHT}Current Installation{Colors.RESET}")
print("=" * 50)
if not info["exists"]:
print(f"{Colors.YELLOW}No SuperClaude installation found{Colors.RESET}")
return
print(f"{Colors.BLUE}Installation Directory:{Colors.RESET} {info['install_dir']}")
if info["components"]:
print(f"{Colors.BLUE}Installed Components:{Colors.RESET}")
for component, version in info["components"].items():
print(f" {component}: v{version}")
print(f"{Colors.BLUE}Files:{Colors.RESET} {len(info['files'])}")
print(f"{Colors.BLUE}Directories:{Colors.RESET} {len(info['directories'])}")
if info["total_size"] > 0:
from ...utils.ui import format_size
print(f"{Colors.BLUE}Total Size:{Colors.RESET} {format_size(info['total_size'])}")
print()
def get_components_to_uninstall(args: argparse.Namespace, installed_components: Dict[str, str]) -> Optional[List[str]]:
"""Determine which components to uninstall"""
logger = get_logger()
# Complete uninstall
if args.complete:
return list(installed_components.keys())
# Explicit components specified
if args.components:
# Validate that specified components are installed
invalid_components = [c for c in args.components if c not in installed_components]
if invalid_components:
logger.error(f"Components not installed: {invalid_components}")
return None
return args.components
# Interactive selection
return interactive_uninstall_selection(installed_components)
def interactive_component_selection(installed_components: Dict[str, str], env_vars: Dict[str, str]) -> Optional[tuple]:
"""
Enhanced interactive selection with granular component options
Returns:
Tuple of (components_to_remove, cleanup_options) or None if cancelled
"""
if not installed_components:
return []
print(f"\n{Colors.CYAN}{Colors.BRIGHT}SuperClaude Uninstall Options{Colors.RESET}")
print("=" * 60)
# Main uninstall type selection
main_options = [
"Complete Uninstall (remove all SuperClaude components)",
"Custom Uninstall (choose specific components)",
"Cancel Uninstall"
]
print(f"\n{Colors.BLUE}Choose uninstall type:{Colors.RESET}")
main_menu = Menu("Select option:", main_options)
main_choice = main_menu.display()
if main_choice == -1 or main_choice == 2: # Cancelled
return None
elif main_choice == 0: # Complete uninstall
# Complete uninstall - include all components and optional cleanup
cleanup_options = _ask_complete_uninstall_options(env_vars)
return list(installed_components.keys()), cleanup_options
elif main_choice == 1: # Custom uninstall
return _custom_component_selection(installed_components, env_vars)
return None
def _ask_complete_uninstall_options(env_vars: Dict[str, str]) -> Dict[str, bool]:
"""Ask for complete uninstall options"""
cleanup_options = {
'remove_mcp_configs': True,
'cleanup_env_vars': False,
'create_restore_script': True
}
print(f"\n{Colors.YELLOW}{Colors.BRIGHT}Complete Uninstall Options{Colors.RESET}")
print("This will remove ALL SuperClaude components.")
if env_vars:
print(f"\n{Colors.BLUE}Environment variables found:{Colors.RESET}")
for env_var, value in env_vars.items():
masked_value = f"{value[:4]}...{value[-4:]}" if len(value) > 8 else "***"
print(f" {env_var}: {masked_value}")
cleanup_env = confirm("Also remove API key environment variables?", default=False)
cleanup_options['cleanup_env_vars'] = cleanup_env
if cleanup_env:
create_script = confirm("Create restore script for environment variables?", default=True)
cleanup_options['create_restore_script'] = create_script
return cleanup_options
def _custom_component_selection(installed_components: Dict[str, str], env_vars: Dict[str, str]) -> Optional[tuple]:
"""Handle custom component selection with granular options"""
print(f"\n{Colors.CYAN}{Colors.BRIGHT}Custom Uninstall - Choose Components{Colors.RESET}")
print("Select which SuperClaude components to remove:")
# Build component options with descriptions
component_options = []
component_keys = []
component_descriptions = {
'core': 'Core Framework Files (CLAUDE.md, FLAGS.md, PRINCIPLES.md, etc.)',
'commands': 'SuperClaude Commands (commands/sc/*.md)',
'agents': 'Specialized Agents (agents/*.md)',
'mcp': 'MCP Server Configurations',
'mcp_docs': 'MCP Documentation',
'modes': 'SuperClaude Modes'
}
for component, version in installed_components.items():
description = component_descriptions.get(component, f"{component} component")
component_options.append(f"{description}")
component_keys.append(component)
print(f"\n{Colors.BLUE}Select components to remove:{Colors.RESET}")
component_menu = Menu("Components:", component_options, multi_select=True)
selections = component_menu.display()
if not selections:
return None
selected_components = [component_keys[i] for i in selections]
# If MCP component is selected, ask about related cleanup options
cleanup_options = {
'remove_mcp_configs': 'mcp' in selected_components,
'cleanup_env_vars': False,
'create_restore_script': True
}
if 'mcp' in selected_components:
cleanup_options.update(_ask_mcp_cleanup_options(env_vars))
elif env_vars:
# Even if MCP not selected, ask about env vars if they exist
cleanup_env = confirm(f"Remove {len(env_vars)} API key environment variables?", default=False)
cleanup_options['cleanup_env_vars'] = cleanup_env
if cleanup_env:
create_script = confirm("Create restore script for environment variables?", default=True)
cleanup_options['create_restore_script'] = create_script
return selected_components, cleanup_options
def _ask_mcp_cleanup_options(env_vars: Dict[str, str]) -> Dict[str, bool]:
"""Ask for MCP-related cleanup options"""
print(f"\n{Colors.YELLOW}{Colors.BRIGHT}MCP Cleanup Options{Colors.RESET}")
print("Since you're removing the MCP component:")
cleanup_options = {}
# Ask about MCP server configurations
remove_configs = confirm("Remove MCP server configurations from .claude.json?", default=True)
cleanup_options['remove_mcp_configs'] = remove_configs
# Ask about API key environment variables
if env_vars:
print(f"\n{Colors.BLUE}Related API key environment variables found:{Colors.RESET}")
for env_var, value in env_vars.items():
masked_value = f"{value[:4]}...{value[-4:]}" if len(value) > 8 else "***"
print(f" {env_var}: {masked_value}")
cleanup_env = confirm(f"Remove {len(env_vars)} API key environment variables?", default=False)
cleanup_options['cleanup_env_vars'] = cleanup_env
if cleanup_env:
create_script = confirm("Create restore script for environment variables?", default=True)
cleanup_options['create_restore_script'] = create_script
else:
cleanup_options['create_restore_script'] = True
else:
cleanup_options['cleanup_env_vars'] = False
cleanup_options['create_restore_script'] = True
return cleanup_options
def interactive_uninstall_selection(installed_components: Dict[str, str]) -> Optional[List[str]]:
"""Legacy function - redirects to enhanced selection"""
env_vars = get_superclaude_environment_variables()
result = interactive_component_selection(installed_components, env_vars)
if result is None:
return None
# For backwards compatibility, return only component list
components, cleanup_options = result
return components
def display_preservation_info() -> None:
"""Show what will NOT be removed (user's custom files)"""
print(f"\n{Colors.GREEN}{Colors.BRIGHT}Files that will be preserved:{Colors.RESET}")
print(f"{Colors.GREEN}+ User's custom commands (not in commands/sc/){Colors.RESET}")
print(f"{Colors.GREEN}+ User's custom agents (not SuperClaude agents){Colors.RESET}")
print(f"{Colors.GREEN}+ User's custom .claude.json configurations{Colors.RESET}")
print(f"{Colors.GREEN}+ User's custom files in shared directories{Colors.RESET}")
print(f"{Colors.GREEN}+ Claude Code settings and other tools' configurations{Colors.RESET}")
def display_component_details(component: str, info: Dict[str, Any]) -> Dict[str, Any]:
"""Get detailed information about what will be removed for a component"""
details = {
'files': [],
'directories': [],
'size': 0,
'description': ''
}
install_dir = info['install_dir']
component_paths = {
'core': {
'files': ['CLAUDE.md', 'FLAGS.md', 'PRINCIPLES.md', 'RULES.md', 'ORCHESTRATOR.md', 'SESSION_LIFECYCLE.md'],
'description': 'Core framework files in ~/.claude/'
},
'commands': {
'files': 'commands/sc/*.md',
'description': 'SuperClaude commands in ~/.claude/commands/sc/'
},
'agents': {
'files': 'agents/*.md',
'description': 'Specialized AI agents in ~/.claude/agents/'
},
'mcp': {
'files': 'MCP server configurations in .claude.json',
'description': 'MCP server configurations'
},
'mcp_docs': {
'files': 'MCP/*.md',
'description': 'MCP documentation files'
},
'modes': {
'files': 'MODE_*.md',
'description': 'SuperClaude operational modes'
}
}
if component in component_paths:
details['description'] = component_paths[component]['description']
# Get actual file count from metadata if available
component_metadata = info["components"].get(component, {})
if isinstance(component_metadata, dict):
if 'files_count' in component_metadata:
details['file_count'] = component_metadata['files_count']
elif 'agents_count' in component_metadata:
details['file_count'] = component_metadata['agents_count']
elif 'servers_configured' in component_metadata:
details['file_count'] = component_metadata['servers_configured']
return details
def display_uninstall_plan(components: List[str], args: argparse.Namespace, info: Dict[str, Any], env_vars: Dict[str, str]) -> None:
"""Display detailed uninstall plan"""
print(f"\n{Colors.CYAN}{Colors.BRIGHT}Uninstall Plan{Colors.RESET}")
print("=" * 60)
print(f"{Colors.BLUE}Installation Directory:{Colors.RESET} {info['install_dir']}")
if components:
print(f"\n{Colors.BLUE}Components to remove:{Colors.RESET}")
total_files = 0
for i, component_name in enumerate(components, 1):
details = display_component_details(component_name, info)
version = info["components"].get(component_name, "unknown")
if isinstance(version, dict):
version_str = version.get('version', 'unknown')
file_count = details.get('file_count', version.get('files_count', version.get('agents_count', version.get('servers_configured', '?'))))
else:
version_str = str(version)
file_count = details.get('file_count', '?')
print(f" {i}. {component_name} (v{version_str}) - {file_count} files")
print(f" {details['description']}")
if isinstance(file_count, int):
total_files += file_count
print(f"\n{Colors.YELLOW}Total estimated files to remove: {total_files}{Colors.RESET}")
# Show detailed preservation information
print(f"\n{Colors.GREEN}{Colors.BRIGHT}Safety Guarantees - Will Preserve:{Colors.RESET}")
print(f"{Colors.GREEN}+ User's custom commands (not in commands/sc/){Colors.RESET}")
print(f"{Colors.GREEN}+ User's custom agents (not SuperClaude agents){Colors.RESET}")
print(f"{Colors.GREEN}+ User's .claude.json customizations{Colors.RESET}")
print(f"{Colors.GREEN}+ Claude Code settings and other tools' configurations{Colors.RESET}")
# Show additional preserved items
preserved = []
if args.keep_backups:
preserved.append("backup files")
if args.keep_logs:
preserved.append("log files")
if args.keep_settings:
preserved.append("user settings")
if preserved:
for item in preserved:
print(f"{Colors.GREEN}+ {item}{Colors.RESET}")
if args.complete:
print(f"\n{Colors.RED}⚠️ WARNING: Complete uninstall will remove all SuperClaude files{Colors.RESET}")
# Environment variable cleanup information
if env_vars:
print(f"\n{Colors.BLUE}Environment Variables:{Colors.RESET}")
if args.cleanup_env:
print(f"{Colors.YELLOW}Will remove {len(env_vars)} API key environment variables:{Colors.RESET}")
for env_var in env_vars.keys():
print(f" - {env_var}")
if not args.no_restore_script:
print(f"{Colors.GREEN} + Restore script will be created{Colors.RESET}")
else:
print(f"{Colors.BLUE}Will preserve {len(env_vars)} API key environment variables:{Colors.RESET}")
for env_var in env_vars.keys():
print(f" + {env_var}")
print()
def create_uninstall_backup(install_dir: Path, components: List[str]) -> Optional[Path]:
"""Create backup before uninstall"""
logger = get_logger()
try:
from datetime import datetime
backup_dir = install_dir / "backups"
backup_dir.mkdir(exist_ok=True)
timestamp = datetime.now().strftime("%Y%m%d_%H%M%S")
backup_name = f"pre_uninstall_{timestamp}.tar.gz"
backup_path = backup_dir / backup_name
import tarfile
logger.info(f"Creating uninstall backup: {backup_path}")
with tarfile.open(backup_path, "w:gz") as tar:
for component in components:
# Add component files to backup
settings_manager = SettingsService(install_dir)
# This would need component-specific backup logic
pass
logger.success(f"Backup created: {backup_path}")
return backup_path
except Exception as e:
logger.warning(f"Could not create backup: {e}")
return None
def perform_uninstall(components: List[str], args: argparse.Namespace, info: Dict[str, Any], env_vars: Dict[str, str]) -> bool:
"""Perform the actual uninstall"""
logger = get_logger()
start_time = time.time()
try:
# Create component registry
registry = ComponentRegistry(PROJECT_ROOT / "setup" / "components")
registry.discover_components()
# Create component instances
component_instances = registry.create_component_instances(components, args.install_dir)
# Setup progress tracking
progress = ProgressBar(
total=len(components),
prefix="Uninstalling: ",
suffix=""
)
# Uninstall components
logger.info(f"Uninstalling {len(components)} components...")
uninstalled_components = []
failed_components = []
for i, component_name in enumerate(components):
progress.update(i, f"Uninstalling {component_name}")
try:
if component_name in component_instances:
instance = component_instances[component_name]
if instance.uninstall():
uninstalled_components.append(component_name)
logger.debug(f"Successfully uninstalled {component_name}")
else:
failed_components.append(component_name)
logger.error(f"Failed to uninstall {component_name}")
else:
logger.warning(f"Component {component_name} not found, skipping")
except Exception as e:
logger.error(f"Error uninstalling {component_name}: {e}")
failed_components.append(component_name)
progress.update(i + 1, f"Processed {component_name}")
time.sleep(0.1) # Brief pause for visual effect
progress.finish("Uninstall complete")
# Handle complete uninstall cleanup
if args.complete:
cleanup_installation_directory(args.install_dir, args)
# Handle environment variable cleanup
env_cleanup_success = True
if args.cleanup_env and env_vars:
logger.info("Cleaning up environment variables...")
create_restore_script = not args.no_restore_script
env_cleanup_success = cleanup_environment_variables(env_vars, create_restore_script)
if env_cleanup_success:
logger.success(f"Removed {len(env_vars)} environment variables")
else:
logger.warning("Some environment variables could not be removed")
# Show results
duration = time.time() - start_time
if failed_components:
logger.warning(f"Uninstall completed with some failures in {duration:.1f} seconds")
logger.warning(f"Failed components: {', '.join(failed_components)}")
else:
logger.success(f"Uninstall completed successfully in {duration:.1f} seconds")
if uninstalled_components:
logger.info(f"Uninstalled components: {', '.join(uninstalled_components)}")
return len(failed_components) == 0
except Exception as e:
logger.exception(f"Unexpected error during uninstall: {e}")
return False
def cleanup_installation_directory(install_dir: Path, args: argparse.Namespace) -> None:
"""Clean up installation directory for complete uninstall"""
logger = get_logger()
file_manager = FileService()
try:
# Preserve specific directories/files if requested
preserve_patterns = []
if args.keep_backups:
preserve_patterns.append("backups/*")
if args.keep_logs:
preserve_patterns.append("logs/*")
if args.keep_settings and not args.complete:
preserve_patterns.append("settings.json")
# Remove installation directory contents
if args.complete and not preserve_patterns:
# Complete removal
if file_manager.remove_directory(install_dir):
logger.info(f"Removed installation directory: {install_dir}")
else:
logger.warning(f"Could not remove installation directory: {install_dir}")
else:
# Selective removal
for item in install_dir.iterdir():
should_preserve = False
for pattern in preserve_patterns:
if item.match(pattern):
should_preserve = True
break
if not should_preserve:
if item.is_file():
file_manager.remove_file(item)
elif item.is_dir():
file_manager.remove_directory(item)
except Exception as e:
logger.error(f"Error during cleanup: {e}")
def run(args: argparse.Namespace) -> int:
"""Execute uninstall operation with parsed arguments"""
operation = UninstallOperation()
operation.setup_operation_logging(args)
logger = get_logger()
# ✅ Inserted validation code
expected_home = get_home_directory().resolve()
actual_dir = args.install_dir.resolve()
if not str(actual_dir).startswith(str(expected_home)):
print(f"\n[x] Installation must be inside your user profile directory.")
print(f" Expected prefix: {expected_home}")
print(f" Provided path: {actual_dir}")
sys.exit(1)
try:
# Validate global arguments
success, errors = operation.validate_global_args(args)
if not success:
for error in errors:
logger.error(error)
return 1
# Display header
if not args.quiet:
from setup.cli.base import __version__
display_header(
f"SuperClaude Uninstall v{__version__}",
"Removing SuperClaude framework components"
)
# Get installation information
info = get_installation_info(args.install_dir)
# Display current installation
if not args.quiet:
display_uninstall_info(info)
# Check for environment variables
env_vars = display_environment_info() if not args.quiet else get_superclaude_environment_variables()
# Check if SuperClaude is installed
if not info["exists"]:
logger.warning(f"No SuperClaude installation found in {args.install_dir}")
return 0
# Get components to uninstall using enhanced selection
if args.components or args.complete:
# Non-interactive mode - use existing logic
components = get_components_to_uninstall(args, info["components"])
cleanup_options = {
'remove_mcp_configs': 'mcp' in (components or []),
'cleanup_env_vars': args.cleanup_env,
'create_restore_script': not args.no_restore_script
}
if components is None:
logger.info("Uninstall cancelled by user")
return 0
elif not components:
logger.info("No components selected for uninstall")
return 0
else:
# Interactive mode - use enhanced selection
result = interactive_component_selection(info["components"], env_vars)
if result is None:
logger.info("Uninstall cancelled by user")
return 0
elif not result:
logger.info("No components selected for uninstall")
return 0
components, cleanup_options = result
# Override command-line args with interactive choices
args.cleanup_env = cleanup_options.get('cleanup_env_vars', False)
args.no_restore_script = not cleanup_options.get('create_restore_script', True)
# Display uninstall plan
if not args.quiet:
display_uninstall_plan(components, args, info, env_vars)
# Confirmation
if not args.no_confirm and not args.yes:
if args.complete:
warning_msg = "This will completely remove SuperClaude. Continue?"
else:
warning_msg = f"This will remove {len(components)} component(s). Continue?"
if not confirm(warning_msg, default=False):
logger.info("Uninstall cancelled by user")
return 0
# Create backup if not dry run and not keeping backups
if not args.dry_run and not args.keep_backups:
create_uninstall_backup(args.install_dir, components)
# Perform uninstall
success = perform_uninstall(components, args, info, env_vars)
if success:
if not args.quiet:
display_success("SuperClaude uninstall completed successfully!")
if not args.dry_run:
print(f"\n{Colors.CYAN}Uninstall complete:{Colors.RESET}")
print(f"SuperClaude has been removed from {args.install_dir}")
if not args.complete:
print(f"You can reinstall anytime using 'SuperClaude install'")
return 0
else:
display_error("Uninstall completed with some failures. Check logs for details.")
return 1
except KeyboardInterrupt:
print(f"\n{Colors.YELLOW}Uninstall cancelled by user{Colors.RESET}")
return 130
except Exception as e:
return operation.handle_operation_error("uninstall", e)