diff --git a/Docs/Reference/common-issues.md b/Docs/Reference/common-issues.md
index a62ccdd..1d4fa22 100644
--- a/Docs/Reference/common-issues.md
+++ b/Docs/Reference/common-issues.md
@@ -1,553 +1,172 @@
-# Common Issues Guide
+# Common Issues - Quick Reference
 
-> **Command Context**: This guide covers both **Terminal Commands** (for installation/setup issues) and **Claude Code Commands** (`/sc:` for development issues). Each section is clearly marked.
+> **Quick Fix Guide**: The 10 most common SuperClaude issues with rapid solutions. Each issue is designed to be resolved in under 2 minutes.
 
-**Quick Resolution Focus**: Most common SuperClaude issues can be resolved in under 5 minutes with the right diagnostic approach. This guide provides systematic troubleshooting methods for installation, basic commands, and platform-specific problems.
+**For Detailed Help**: If these quick fixes don't work, see the [Comprehensive Troubleshooting Guide](troubleshooting.md) for detailed solutions.
 
-**Problem Classification**: Issues are categorized by type for fast navigation - installation failures, command execution problems, and platform-specific compatibility issues.
+> **Command Context**: **🖥️ Terminal Commands** (for installation) vs **💬 Claude Code Commands** (`/sc:` for development)
 
-## 🖥️ Installation Issues (Terminal Commands)
+## Top 10 Quick Fixes
 
-### Permission and Access Problems
+### 1. 🖥️ Permission Denied During Installation
+**Error**: `ERROR: Permission denied: '/home/user/.claude/CLAUDE.md'`
 
-#### Issue: Permission Denied During Installation
-**Error Message**: `ERROR: Permission denied: '/home/user/.claude/CLAUDE.md'`
-
-**Diagnosis**:
+**Quick Fix**:
 ```bash
-ls -la ~/.claude/
-# Check file ownership and permissions
+sudo chown -R $USER ~/.claude && chmod 755 ~/.claude
 ```
 
-**Solution 1**: Fix permissions
-```bash
-sudo chown -R $USER ~/.claude
-chmod 755 ~/.claude
-```
+**Alternative**: Use user installation: `pip install --user SuperClaude`
 
-**Solution 2**: Use --user installation
-```bash
-pip install --user SuperClaude
-python3 -m SuperClaude install --install-dir ~/superclaude
-```
-
-**Verification**:
-```bash
-ls -la ~/.claude/
-python3 -m SuperClaude --version
-```
-
-**Prevention**: Always install SuperClaude in user space, avoid sudo for installation
-
-**Issue: Directory Creation Failures**
-```bash
-# Error message
-ERROR: Cannot create directory ~/.claude
-
-# Diagnosis
-whoami
-ls -la ~/
-# Check home directory permissions
-
-# Solution 1: Manual directory creation
-mkdir -p ~/.claude
-chmod 755 ~/.claude
-python3 -m SuperClaude install
-
-# Solution 2: Alternative installation directory
-python3 -m SuperClaude install --install-dir ~/Documents/superclaude
-
-# Verification
-ls -la ~/.claude/
-cat ~/.claude/CLAUDE.md | head -5
-```
-
-### Python Version and Compatibility
-
-**Issue: Python Version Compatibility**
-```bash
-# Error message
-ERROR: SuperClaude requires Python 3.8+ but found Python 3.7
-
-# Diagnosis
-python3 --version
-which python3
-
-# Solution 1: Update Python (Linux/Ubuntu)
-sudo apt update
-sudo apt install python3.8 python3.8-pip
-python3.8 -m pip install SuperClaude
-
-# Solution 2: Use pyenv for version management
-curl https://pyenv.run | bash
-pyenv install 3.9.0
-pyenv global 3.9.0
-pip install SuperClaude
-
-# Solution 3: Virtual environment with specific Python
-python3.9 -m venv superclaude-env
-source superclaude-env/bin/activate
-pip install SuperClaude
-
-# Verification
-python3 --version
-python3 -m SuperClaude --version
-```
-
-**Issue: Package Installation Conflicts**
-```bash
-# Error message
-ERROR: Package 'SuperClaude' conflicts with existing installation
-
-# Diagnosis
-pip list | grep -i claude
-pip show SuperClaude
-
-# Solution 1: Clean uninstall and reinstall
-pip uninstall SuperClaude
-pip install SuperClaude
-
-# Solution 2: Force upgrade
-pip install --upgrade --force-reinstall SuperClaude
-
-# Solution 3: Virtual environment isolation
-python3 -m venv fresh-superclaude
-source fresh-superclaude/bin/activate
-pip install SuperClaude
-
-# Verification
-pip show SuperClaude
-python3 -m SuperClaude --version
-```
-
-### Component Installation Failures
-
-**Issue: Component Installation Failures**
-```bash
-# Error message
-ERROR: Component 'mcp' installation failed - dependency not met
-
-# Diagnosis
-python3 -m SuperClaude --version
-ls ~/.claude/
-# Check component installation status
-
-# Solution 1: Install dependencies first
-python3 -m SuperClaude install --components core  # Install core first
-python3 -m SuperClaude install --components mcp   # Then install MCP
-
-# Solution 2: Force reinstallation
-python3 -m SuperClaude install --components mcp --force
-
-# Solution 3: Clean installation
-rm -rf ~/.claude/
-python3 -m SuperClaude install --fresh
-
-# Verification
-cat ~/.claude/CLAUDE.md | grep -E "MCP|SuperClaude"
-ls ~/.claude/
-
-# Prevention
-# Always install components in dependency order: core → agents → modes → mcp
-```
-
-**Issue: Incomplete Installation**
-```bash
-# Symptoms: Missing files or configuration elements
-
-# Diagnosis
-ls ~/.claude/
-cat ~/.claude/CLAUDE.md | wc -l
-# Should have substantial content (>100 lines)
-
-# Solution 1: Complete installation
-python3 -m SuperClaude install --components core agents modes mcp
-
-# Solution 2: Fresh installation
-rm -rf ~/.claude/
-python3 -m SuperClaude install --fresh
-
-# Solution 3: Component-by-component installation
-python3 -m SuperClaude install --components core
-python3 -m SuperClaude install --components agents
-python3 -m SuperClaude install --components modes
-
-# Verification
-cat ~/.claude/CLAUDE.md | grep "@"
-# Should show multiple @imports for components
-```
-
-## Platform-Specific Issues
-
-### Windows Platform Issues
-
-**Windows Path and Environment Problems:**
-```cmd
-# Issue: Path separator problems
-ERROR: Cannot find file 'C:\Users\name\.claude\CLAUDE.md'
-
-# Solution: Use proper Windows paths
-set CLAUDE_CONFIG_DIR=C:\Users\%USERNAME%\.claude
-python -m SuperClaude install --install-dir "%CLAUDE_CONFIG_DIR%"
-
-# Issue: PowerShell execution policy
-Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope CurrentUser
-
-# Issue: Node.js not found for MCP servers
-# Solution: Install Node.js from official source
-winget install OpenJS.NodeJS
-# or download from https://nodejs.org/
-
-# Verification
-python -m SuperClaude --version
-dir "%USERPROFILE%\.claude"
-```
-
-**Windows Subsystem for Linux (WSL) Issues:**
-```bash
-# Issue: WSL path conflicts
-ERROR: Cannot access Windows user directory
-
-# Solution 1: Use WSL-native paths
-python3 -m SuperClaude install --install-dir ~/.claude
-
-# Solution 2: Configure WSL-Windows path mapping
-export CLAUDE_CONFIG_DIR=/mnt/c/Users/$USER/.claude
-python3 -m SuperClaude install --install-dir "$CLAUDE_CONFIG_DIR"
-
-# Verification
-ls ~/.claude/
-python3 -m SuperClaude --version
-```
-
-### macOS Platform Issues
-
-**macOS Python and Homebrew Conflicts:**
-```bash
-# Issue: Homebrew Python conflicts
-# Solution: Use pyenv for Python management
-brew install pyenv
-echo 'export PATH="$HOME/.pyenv/bin:$PATH"' >> ~/.zshrc
-echo 'eval "$(pyenv init --path)"' >> ~/.zshrc
-source ~/.zshrc
-pyenv install 3.9.0
-pyenv global 3.9.0
-
-# Issue: Rosetta compatibility on Apple Silicon
-# Solution: Install native Python and Node.js
-arch -arm64 brew install python@3.9
-arch -arm64 brew install node
-
-# Issue: System Integrity Protection conflicts
-# Solution: User-space installation only
-pip install --user SuperClaude
-python3 -m SuperClaude install --install-dir ~/.claude
-
-# Verification
-python3 --version
-which python3
-python3 -m SuperClaude --version
-```
-
-**macOS Permission Issues:**
-```bash
-# Issue: Gatekeeper blocking installation
-# Solution: Allow unsigned packages (carefully)
-sudo spctl --master-disable  # Temporarily
-pip install SuperClaude
-sudo spctl --master-enable   # Re-enable after installation
-
-# Issue: Keychain access problems
-# Solution: Use system keychain for Node.js packages
-security unlock-keychain ~/Library/Keychains/login.keychain
-
-# Verification
-python3 -m SuperClaude --version
-ls -la ~/.claude/
-```
-
-### Linux Distribution Issues
-
-**Ubuntu/Debian Issues:**
-```bash
-# Issue: Missing system dependencies
-sudo apt update
-sudo apt install python3-dev python3-pip build-essential
-
-# Issue: Python 3.8+ not available on older versions
-# Solution: Add deadsnakes PPA
-sudo add-apt-repository ppa:deadsnakes/ppa
-sudo apt update
-sudo apt install python3.9 python3.9-pip
-python3.9 -m pip install SuperClaude
-
-# Verification
-python3 --version
-python3 -m SuperClaude --version
-```
-
-**CentOS/RHEL Issues:**
-```bash
-# Issue: Python 3.8+ not available
-sudo yum install python39 python39-pip
-python3.9 -m pip install SuperClaude
-
-# Issue: Node.js repository setup for MCP servers
-curl -fsSL https://rpm.nodesource.com/setup_lts.x | sudo bash -
-sudo yum install -y nodejs
-
-# Verification
-python3.9 --version
-python3.9 -m SuperClaude --version
-```
-
-**Arch Linux Issues:**
-```bash
-# Issue: Package conflicts
-sudo pacman -S python python-pip
-pip install --user SuperClaude
-
-# Issue: Node.js version conflicts for MCP
-sudo pacman -S nodejs npm
-# or use nvm for version management
-curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.39.0/install.sh | bash
-nvm install node
-
-# Verification
-python --version
-python -m SuperClaude --version
-```
-
-## Basic Command Issues
-
-### Command Recognition Problems
-
-**Issue: Command Not Found**
-```bash
-# Error message
-ERROR: Command '/sc:analyze' not recognized
-
-# Diagnosis
-# Check if SuperClaude is properly installed
-python3 -m SuperClaude --version
-ls ~/.claude/
-
-# Check Claude Code session
-claude --version
-
-# Solution 1: Restart Claude Code session
-# Exit and restart Claude Code completely
-
-# Solution 2: Verify installation
-cat ~/.claude/CLAUDE.md
-python3 -m SuperClaude install --components core --force
-
-# Solution 3: Manual verification
-cat ~/.claude/CLAUDE.md
-# Should contain SuperClaude instructions and imports
-
-# Verification
-grep "SuperClaude" ~/.claude/CLAUDE.md
-# Should show framework content
-
-# Prevention
-# Always restart Claude Code after SuperClaude installation
-```
-
-**Issue: Partial Command Recognition**
-```bash
-# Symptoms: Some commands work, others don't
-
-# Diagnosis
-cat ~/.claude/CLAUDE.md | grep -E "@|SuperClaude"
-# Check for missing components
-
-# Solution 1: Complete component installation
-python3 -m SuperClaude install --components core agents modes mcp
-
-# Solution 2: Reset configuration
-cp ~/.claude/CLAUDE.md ~/.claude/CLAUDE.md.backup
-python3 -m SuperClaude install --reset-config
-
-# Solution 3: Fresh installation
-rm -rf ~/.claude/
-python3 -m SuperClaude install --fresh
-
-# Verification
-cat ~/.claude/CLAUDE.md | wc -l
-# Should have substantial content (>100 lines)
-```
-
-### Command Execution Problems
-
-**Issue: Command Timeout or Hanging**
-```bash
-# Symptoms: Command runs but never completes
-
-# Diagnosis
-# Check system resources
-top
-df -h
-ps aux | grep claude
-
-# Solution 1: Reduce scope
-python3 -m SuperClaude analyze src/ --scope file    # Instead of entire project
-
-# Solution 2: Use scope limiting
-python3 -m SuperClaude analyze ./specific-folder/ --scope module
-
-# Solution 3: Clear session data and restart
-# Remove old session files if they exist
-rm -rf ~/.claude/sessions/old-*
-# Restart Claude Code session
-
-# Verification
-time python3 -m SuperClaude --version
-# Should complete quickly
-
-# Prevention
-# Use appropriate scope for large projects
-# Monitor system resources before large operations
-```
-
-**Issue: Command Returns Unexpected Results**
-```bash
-# Symptoms: Command executes but produces wrong output
-
-# Diagnosis
-# Check current directory and context
-pwd
-ls -la
-
-# Solution 1: Use explicit paths
-python3 -m SuperClaude analyze ./specific-folder/
-
-# Solution 2: Verify configuration
-cat ~/.claude/CLAUDE.md | head -20
-grep "SuperClaude" ~/.claude/CLAUDE.md
-
-# Solution 3: Reset session context
-# Restart Claude Code and reload if needed
-
-# Verification
-python3 -m SuperClaude --version
-ls ~/.claude/
-
-# Prevention
-# Use explicit paths and clear task descriptions
-```
-
-## Configuration Validation
-
-### Quick Health Checks
-
-**Basic Configuration Validation:**
-```bash
-# Essential health check
-python3 -m SuperClaude --version        # Version verification
-ls ~/.claude/                           # Check installation
-cat ~/.claude/CLAUDE.md | grep "@"      # Check imports
-
-# Component verification
-cat ~/.claude/CLAUDE.md | grep -E "FLAGS|RULES|PRINCIPLES"  # Core components
-cat ~/.claude/CLAUDE.md | grep -E "MODE_|MCP_"              # Modes and MCP
-
-# File integrity check
-wc -l ~/.claude/CLAUDE.md
-# Should have substantial content (>100 lines)
-```
-
-**System Requirements Validation:**
-```bash
-# System requirements validation
-python3 --version  # Should be 3.8+
-which claude       # Should return path to Claude Code
-df -h ~            # Check disk space (50MB+ available)
-touch ~/.claude/test && rm ~/.claude/test  # Test write permissions
-
-# Expected validations:
-# ✅ Python 3.8+ detected
-# ✅ Claude Code installation verified  
-# ✅ Sufficient disk space (50MB minimum)
-# ✅ Write permissions to ~/.claude directory
-# ⚠️  Node.js 16+ recommended for MCP servers
-```
-
-### Emergency Recovery
-
-**Complete Configuration Reset:**
-```bash
-# Emergency Recovery Procedure
-# Step 1: Backup current state
-cp -r ~/.claude ~/.claude.backup.$(date +%Y%m%d)
-
-# Step 2: Complete reset
-rm -rf ~/.claude/
-python3 -m SuperClaude install --fresh
-
-# Step 3: Verification
-python3 -m SuperClaude --version
-cat ~/.claude/CLAUDE.md | grep SuperClaude
-
-# Step 4: Gradual reconfiguration
-python3 -m SuperClaude install --components core agents modes
-# Test after each component
-
-# Prevention
-# Regular configuration backups
-# Test configuration changes in non-production environment
-```
-
-## Quick Diagnostic Commands
-
-### Rapid Problem Identification
-
-**One-Minute Health Check:**
-```bash
-# Rapid diagnostic sequence
-echo "=== SuperClaude Health Check ==="
-python3 -m SuperClaude --version
-echo "=== Installation Check ==="
-ls ~/.claude/
-echo "=== Configuration Check ==="
-cat ~/.claude/CLAUDE.md | head -5
-echo "=== Component Check ==="
-grep -c "@" ~/.claude/CLAUDE.md
-echo "=== System Resources ==="
-df -h ~ | grep -E "Avail|Available"
-```
-
-**Problem Classification:**
-```bash
-# Quick problem identification
-if ! python3 -m SuperClaude --version; then
-    echo "❌ Installation Problem - Check Python and package installation"
-elif ! ls ~/.claude/CLAUDE.md; then
-    echo "❌ Configuration Problem - Run fresh installation"
-elif [ $(cat ~/.claude/CLAUDE.md | wc -l) -lt 50 ]; then
-    echo "⚠️ Incomplete Installation - Reinstall components"
-else
-    echo "✅ Basic Configuration OK - Check specific component issues"
-fi
-```
-
-## Related Resources
-
-### Essential References
-- **Installation Guide**: [../Getting-Started/installation.md](../Getting-Started/installation.md) - Complete installation procedures
-- **MCP Server Guide**: [mcp-server-guide.md](mcp-server-guide.md) - MCP-specific troubleshooting
-- **Diagnostic Reference**: [diagnostic-reference.md](diagnostic-reference.md) - Advanced diagnostic procedures
-- **System Requirements**: [../Getting-Started/installation.md#prerequisites-setup-🛠️](../Getting-Started/installation.md#prerequisites-setup-🛠️) - Hardware and software requirements
-
-### Support Channels
-- **GitHub Issues**: [Technical problems and bug reports](https://github.com/SuperClaude-Org/SuperClaude_Framework/issues)
-- **GitHub Discussions**: [General help and community support](https://github.com/SuperClaude-Org/SuperClaude_Framework/discussions)
+[Detailed Help →](troubleshooting.md#common-installation-problems)
 
 ---
 
-**Emergency Contact**: If all solutions fail, backup your configuration (`cp -r ~/.claude ~/.claude.backup`) and perform a fresh installation (`rm -rf ~/.claude && python3 -m SuperClaude install --fresh`). Report persistent issues to GitHub with diagnostic information.
+### 2. 🖥️ Python Version Too Old  
+**Error**: `ERROR: SuperClaude requires Python 3.8+`
 
-**Verification Pattern**: After every solution, verify with:
-- ✅ `python3 -m SuperClaude --version` - Should return version number
-- ✅ `cat ~/.claude/CLAUDE.md | grep SuperClaude` - Should show framework content
-- ✅ Try basic commands in Claude Code - Should work without errors
\ No newline at end of file
+**Quick Fix**:
+```bash
+python3 --version  # Check current version
+# If < 3.8, install newer Python:
+sudo apt install python3.9 python3.9-pip  # Linux
+python3.9 -m pip install SuperClaude
+```
+
+[Detailed Help →](troubleshooting.md#python-version-compatibility)
+
+---
+
+### 3. 🖥️ Component Installation Failed
+**Error**: `ERROR: Component 'mcp' installation failed`
+
+**Quick Fix**:
+```bash
+python3 -m SuperClaude install --components core
+python3 -m SuperClaude install --components mcp --force
+```
+
+[Detailed Help →](troubleshooting.md#component-installation-failures)
+
+---
+
+### 4. 💬 Commands Not Working in Claude Code
+**Error**: `/sc:help` command not recognized
+
+**Quick Fix**:
+1. Restart Claude Code completely
+2. Verify installation: `cat ~/.claude/CLAUDE.md | head -5`
+3. If empty, reinstall: `python3 -m SuperClaude install --force`
+
+[Detailed Help →](troubleshooting.md#command-execution-problems)
+
+---
+
+### 5. 🖥️ "SuperClaude" Command Not Found
+**Error**: `command not found: SuperClaude`
+
+**Quick Fix**:
+```bash
+# Try lowercase:
+superclaude --version
+# Or use module form:
+python3 -m SuperClaude --version
+```
+
+[Detailed Help →](troubleshooting.md#command-not-found)
+
+---
+
+### 6. 🖥️ Windows Path Problems
+**Error**: `Cannot find file 'C:\Users\name\.claude\CLAUDE.md'`
+
+**Quick Fix**:
+```cmd
+set CLAUDE_CONFIG_DIR=C:\Users\%USERNAME%\.claude
+python -m SuperClaude install --install-dir "%CLAUDE_CONFIG_DIR%"
+```
+
+[Detailed Help →](troubleshooting.md#windows-platform-issues)
+
+---
+
+### 7. 💬 Commands Hang or Timeout
+**Error**: Commands start but never complete
+
+**Quick Fix**:
+1. Press Ctrl+C to cancel
+2. Try smaller scope: `/sc:analyze src/` instead of entire project
+3. Restart Claude Code session
+
+[Detailed Help →](troubleshooting.md#command-timeout-or-hanging)
+
+---
+
+### 8. 🖥️ Node.js Missing for MCP Servers
+**Error**: `Node.js not found` during MCP installation
+
+**Quick Fix**:
+```bash
+# Linux/macOS:
+curl -fsSL https://nodejs.org/dist/v18.17.0/node-v18.17.0-linux-x64.tar.xz | tar -xJ
+# Windows:
+winget install OpenJS.NodeJS
+```
+
+[Detailed Help →](troubleshooting.md#mcp-server-connection-problems)
+
+---
+
+### 9. 💬 Memory/Resource Errors
+**Error**: Insufficient memory or resources
+
+**Quick Fix**:
+```bash
+# Clear temporary data:
+rm -rf ~/.claude/tmp/ ~/.claude/cache/
+# Work with smaller projects
+# Close other applications
+```
+
+[Detailed Help →](troubleshooting.md#performance-problems-and-optimization)
+
+---
+
+### 10. 🖥️ Fresh Installation Needed
+**Error**: Multiple issues, corrupted installation
+
+**Quick Fix**:
+```bash
+rm -rf ~/.claude/
+pip uninstall SuperClaude
+pip install SuperClaude
+python3 -m SuperClaude install --fresh
+```
+
+[Detailed Help →](troubleshooting.md#reset-and-recovery-procedures)
+
+---
+
+## Emergency Recovery
+
+**Complete Reset** (when everything is broken):
+```bash
+rm -rf ~/.claude/ && pip uninstall SuperClaude && pip install SuperClaude && python3 -m SuperClaude install --fresh
+```
+
+**Test Installation**:
+```bash
+python3 -m SuperClaude --version && echo "✅ Installation OK"
+```
+
+**Test Claude Code Integration**:
+Type `/sc:help` in Claude Code - should show available commands.
+
+---
+
+## Need More Help?
+
+- **🔍 Detailed Solutions**: [Comprehensive Troubleshooting Guide](troubleshooting.md)
+- **📖 Setup Help**: [Installation Guide](../Getting-Started/installation.md)  
+- **🆘 Report Issues**: [GitHub Issues](https://github.com/SuperClaude-Org/SuperClaude_Framework/issues)
+- **📧 Emergency Contact**: anton.knoery@gmail.com
\ No newline at end of file
diff --git a/Docs/Reference/troubleshooting.md b/Docs/Reference/troubleshooting.md
index 0e19c07..3539449 100644
--- a/Docs/Reference/troubleshooting.md
+++ b/Docs/Reference/troubleshooting.md
@@ -1,85 +1,87 @@
 # SuperClaude Troubleshooting Guide
 
+> **Need a Quick Fix?** For the top 10 most common issues with rapid 2-minute solutions, see the [Common Issues Quick Reference](common-issues.md) first.
+
 > **Command Context**: This guide covers both **Terminal Commands** (for installation issues) and **Claude Code Commands** (`/sc:` for development issues). Look for section headers to know which type to use.
 
-**Comprehensive Problem Resolution**: Step-by-step solutions for common SuperClaude issues, from installation problems to advanced configuration challenges. Each solution includes diagnosis steps, resolution procedures, and prevention strategies.
+**Comprehensive Problem Resolution**: Step-by-step solutions for complex SuperClaude issues, from installation problems to advanced configuration challenges. Each solution includes diagnosis steps, resolution procedures, and prevention strategies.
 
-**Quick Resolution Focus**: Most issues can be resolved in under 5 minutes with the right diagnostic approach. This guide provides systematic troubleshooting methods to get you back to productive development quickly.
+**When to Use This Guide**: Use this comprehensive guide when the [quick fixes](common-issues.md) don't resolve your issue, or when you need detailed diagnosis and prevention strategies.
 
 ## Installation Issues
 
-### Common Installation Problems
+> **🚀 Quick Fix**: For common installation problems like permission denied, Python version issues, or component failures, try the [Common Issues Quick Reference](common-issues.md#top-10-quick-fixes) first.
 
-**Issue: Permission Denied During Installation**
+### Advanced Installation Diagnosis
+
+**Issue: Complex Dependency Conflicts**
 ```bash
-# Error message
-ERROR: Permission denied: '/home/user/.claude/CLAUDE.md'
+# Error message variations
+ERROR: Package has conflicting dependencies
+ERROR: Cannot resolve version requirements
+ERROR: Installation failed due to environment conflicts
 
-# Diagnosis
+# Advanced Diagnosis
+pip list --outdated
+pip check
+python3 -m pip debug --verbose
+
+# Solution 1: Virtual environment isolation
+python3 -m venv fresh-superclaude-env
+source fresh-superclaude-env/bin/activate
+pip install --upgrade pip setuptools wheel
+pip install SuperClaude
+
+# Solution 2: Dependency conflict resolution
+pip install pip-tools
+pip-compile requirements.in  # If you have requirements.in
+pip-sync requirements.txt
+
+# Solution 3: System package manager conflicts (Linux)
+# Use pipx for isolated installation
+python3 -m pip install --user pipx
+pipx install SuperClaude
+pipx ensurepath
+
+# Prevention
+# Use virtual environments for all Python development
+# Regular dependency audits and updates
+```
+
+**Issue: Partial Component Installation**
+```bash
+# Symptoms: Some components install, others fail silently
+
+# Advanced Diagnosis
+python3 -m SuperClaude install --dry-run --verbose
+cat ~/.claude/CLAUDE.md | grep -E "@|import"
 ls -la ~/.claude/
-# Check file ownership and permissions
 
-# Solution 1: Fix permissions
-sudo chown -R $USER ~/.claude
-chmod 755 ~/.claude
+# Component dependency validation
+python3 -c "
+import importlib
+components = ['FLAGS', 'RULES', 'PRINCIPLES', 'MODE_Task_Management']
+for comp in components:
+    try:
+        print(f'✅ {comp}: Available')
+    except ImportError:
+        print(f'❌ {comp}: Missing')
+"
 
-# Solution 2: Use --user installation
-pip install --user SuperClaude
-python3 -m SuperClaude install --install-dir ~/superclaude
+# Solution: Incremental installation with validation
+for component in core agents modes mcp; do
+    echo "Installing $component..."
+    python3 -m SuperClaude install --components $component
+    # Validate after each component
+    if ! cat ~/.claude/CLAUDE.md | grep -q "@"; then
+        echo "❌ Component $component failed"
+        break
+    fi
+done
 
 # Prevention
-# Always install SuperClaude in user space, avoid sudo for installation
-```
-
-**Issue: Python Version Compatibility**
-```bash
-# Error message
-ERROR: SuperClaude requires Python 3.8+ but found Python 3.7
-
-# Diagnosis
-python3 --version
-which python3
-
-# Solution 1: Update Python (Linux/Ubuntu)
-sudo apt update
-sudo apt install python3.8 python3.8-pip
-python3.8 -m pip install SuperClaude
-
-# Solution 2: Use pyenv for version management
-curl https://pyenv.run | bash
-pyenv install 3.9.0
-pyenv global 3.9.0
-pip install SuperClaude
-
-# Solution 3: Virtual environment with specific Python
-python3.9 -m venv superclaude-env
-source superclaude-env/bin/activate
-pip install SuperClaude
-```
-
-**Issue: Component Installation Failures**
-```bash
-# Error message
-ERROR: Component 'mcp' installation failed - dependency not met
-
-# Diagnosis
-python3 -m SuperClaude --version
-ls ~/.claude/
-# Check component installation status
-
-# Solution 1: Install dependencies first
-python3 -m SuperClaude install --components core  # Install core first
-python3 -m SuperClaude install --components mcp   # Then install MCP
-
-# Solution 2: Force reinstallation
-python3 -m SuperClaude install --components mcp --force
-
-# Solution 3: Clean installation
-rm -rf ~/.claude/
-python3 -m SuperClaude install --fresh
-
-# Prevention
-# Always install components in dependency order: core → agents → modes → mcp
+# Install components one at a time for large projects
+# Validate installation after each component
 ```
 
 ### Platform-Specific Issues
@@ -138,35 +140,9 @@ pip install --user SuperClaude
 
 ## Command Issues
 
-### Command Execution Problems
+> **🚀 Quick Fix**: For command recognition problems, timeouts, or basic execution issues, try the [Common Issues Quick Reference](common-issues.md#4--commands-not-working-in-claude-code) first.
 
-**Issue: Command Not Found**
-```bash
-# Error message
-ERROR: Command '/sc:analyze' not recognized
-
-# Diagnosis
-# Check if SuperClaude is properly installed
-python3 -m SuperClaude --version
-ls ~/.claude/
-
-# Check Claude Code session
-claude --version
-
-# Solution 1: Restart Claude Code session
-# Exit and restart Claude Code completely
-
-# Solution 2: Verify installation
-cat ~/.claude/CLAUDE.md
-python3 -m SuperClaude install --components core --force
-
-# Solution 3: Manual verification
-cat ~/.claude/CLAUDE.md
-# Should contain SuperClaude instructions and imports
-
-# Prevention
-# Always restart Claude Code after SuperClaude installation
-```
+### Advanced Command Diagnosis
 
 **Issue: Command Timeout or Hanging**
 ```bash
@@ -282,7 +258,9 @@ grep "SuperClaude" ~/.claude/CLAUDE.md
 
 ## Agent & Mode Issues
 
-### Agent Activation Problems
+> **🚀 Quick Fix**: For basic agent and mode issues, most problems can be resolved by restarting Claude Code and checking component installation with `python3 -m SuperClaude install --components agents modes --force`.
+
+### Advanced Agent Diagnosis
 
 **Issue: Expected Agent Not Activating**
 ```bash
@@ -408,7 +386,9 @@ echo "Requirements: vague project, needs discovery"
 
 ## MCP Server Issues
 
-### MCP Server Connection Problems
+> **🚀 Quick Fix**: For Node.js missing or MCP connection problems, see [Common Issues Quick Reference](common-issues.md#8--nodejs-missing-for-mcp-servers) for rapid solutions.
+
+### Advanced MCP Diagnosis
 
 **Issue: Context7 Server Not Connecting**
 ```bash
@@ -770,7 +750,9 @@ python3 -m SuperClaude install --components core agents modes
 
 ## Performance Issues
 
-### Performance Problems and Optimization
+> **🚀 Quick Fix**: For memory errors or resource issues, see [Common Issues Quick Reference](common-issues.md#9--memoryresource-errors) for immediate solutions.
+
+### Advanced Performance Optimization
 
 **Issue: Slow Command Execution**
 ```bash